Applications
Viscoelastic behaviour of composite laminates from
quantitative DMTA
G. Kotsikos, A.M. Robinson, A.G. Gibson
View Full
Article
top
Integrity of composite aircraft fuselage materials under
crash fire conditions
G.La Delfia, J. W. Luinge, A. G. Gibson
View Full Article
top
Phenolic and polyester pultrusions underload in fire:
development of a failure model
V. Urso Miano, A. G. Gibson
View Full Article
top
Novel dental cements containing combinations of
cyanoacrylate resin, hydroxyapatite, and new aluminium-based
fillers
S. K. Tomlinson, P. Brookbank, O. R. Ghita, M. Beard, K.
E. Evans
View Full Article
top
Effect of process parameters on the grinding of
polymeric composites
S. D. El Wakil N. Abd El-Salam Azab
View Full Article
top
Effect of stress ratio on the fatigue crack growth
behaviour of C/C composites
J. Ohgi, K. Goda
View Full Article
top
Mechanical failure of a composite helicopter structure
under static loading
S. Roy, L. Lessard
View Full Article
top
Initiation and propagation mechanisms of progressive
crushing in carbon-epoxy laminated plates
D. Guillon, S. Rivallant, J.-J. Barrau, C. Petiot, P.
Thévenet, N. Pechnik
View Full Article
top
Use of composite materials in public service vehicles
P. Neves, A. A. Fernandes, A. Ferreira, A. T. Marques, N.
Correia, B. Almada-Lobo
View Full Article
top
On the mechanical behaviour of monofilament technical
textiles
V. Carvelli
View Full Article
top
Experimental investigation of composite patch reinforced
corroded steel plates in static loading
N. G. Tsouvalis, L. S. Mirisiotis, T. E. Tsiourva
View Full Article
top
Characterization of grain byproducts and properties of
its biodegrade composites
A. K. Bledzki, A. A. Mamun, J. Volk
View Full Article
top
Characterization of indentation damage on carbon/epoxy
laminates by means of acoustic emission
C. Caneva, I. M. De Rosa, C. Santulli, and F. Sarasini
View Full Article
top
Free radial vibrations in three-layer spherical sandwich
shell
V. Polyakov, V. Khitrov, R. Chatys
View Full Article
top
Properties of a mechanoactivated composite based on
super-high-molecular polyethylene filled with bronze powder
A. A. Dorofeev, S. D. Kaloshkin, V. V. Tcherdyntsev, O.
I. Degtiareva, I. V. Mochkina, N. V. Yurieva, V. D. Danilov,
V. A. Sudarchikov
View Full Article
top
Analyzis of the fatigue life of hydrogen high pressure
tanks
O. Comond, D. Perreux, F. Thiébaud, D. Chapelle, P.
Robinet, P. Delobelle, M. Weber, H. Barthelemy
View Full
Article top
Bio-based Composites
Study of the tensile properties of stinging nettle
fibres (urtica dioica) for polymer reinforcement: study of
single fibre tensile properties
E. Bodros, C. Baley
View Full
Article
top
Kenaf Fibre as Reinforcement in Aliphatic-Aromatic
Co-polyester Bio-composites
B.R Guduri, G.G Phiri
View Full
Article
top
Mechanical behavior of interpenetrating al-sic composites
derived from wood templates
T. E. Wilkes, J. Y. Pastor, J. Llorca, K. T. Faber
View Full
Article
top
Graftning of poly(ε-caprolactone) from microfibrillated
cellulose films - for biocompostes applications
H. Lönnberg, L. Fogelström, Q. Zhou, L. Berglund, E.
Malmström, A. Hult
View Full
Article
top
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
M. Avella, G. Gentile, G. Bogoeva-Gaceva, M.
E.Errico, A. Grozdanov, A. Buzarovska, V. Srebrenkoska
View Full
Article
top
Understanding the links between structure and properties
in die drawing wood powder polymer composites
I. Połeć, P.J. Hine, M.J. Bonner, I.M. Ward, D.C. Barton
View Full
Article
top
Micromechanical modeling of wood fiber composites
E. Marklund, J. Varna
View Full
Article
top
How the morphology of a flax fibre influences its
mechanical behaviour
K. Charlet, J-P. Jernot, M. Gomina, C. Baley, J. Bréard
View Full
Article
top
Application of micromechanical models for estimating
wood plastic composites properties
C. Burgstaller, W. Stadlbauer
View Full
Article
top
Vacuum infusion of natural fibre composites for
structural applications
M.C. Symington, O.S. David-West, W.M Banks, J.L Thomason
R.A Pethrick
View Full
Article
top
Mechanical testing of natural fibre reinforced polyester
resin composites and mode 1 fracture toughness testing of
resin blocks
O.S David-West, M.C Symington, R. A Pethrick, W.M Banks,
J Thomason
View Full
Article
top
Deformation micromechanics of glass fibre based and
hybrid cellulose-glass fibre composites
M. Hejda, K. Kong, R.J. Young, S.J. Eichhorn
View Full
Article
top
Water glass as hydrophobic and flame retardant additive
for natural fiber reinforced composites
L.A. Medina, R. Schledjewski
View Full
Article
top
High impact modification of PLA with natural rubber and
the influence of fiber content, fiber length on the impact
strength of pla-flax-natural rubber composites
R. Forstner, T. Auinger, R. Ruf, W. Stadlbauer
View Full
Article
top
Thermo - hydromechanical compression of fast growing
poplar from short term plantation
S. Ziegler, J. Schreiber P. Haller
View Full
Article
top
Hierarchical design as a tool in development of
wood-based composite applications
M. Lindström, E.K. Gamstedt, F. Berthold, J.
Varna, K. Wickholm
View Full
Article
top
Durability of wood flour-recycled
thermoplastics composites under accelerated freeze-thaw
cycles
202] K.B. Adhikary, S. Pang M.P. Staiger
View Full
Article
top
The transverse off-axis stiffness and strength of
softwood
C.S. Moden, J. Polycarpe, L.A. Berglund
View Full
Article
top
Synthesis of reactive soybean oils for the use as
biobased thermoset resins for structural natural fibre
composites
K. Adekunle, D. Åkesson, M. Skrifvars
View Full
Article
top
Hygroexpansion of wood-fibre composite materials:
effects of cell-wall cross-linking and composition of
thermoplastic matrix
K.M. Almgren, E. K. Gamstedt, F. Berthold M. Lindström
View Full
Article
top
Bio-composites from canola oil based resin and hemp and
flax fibers
M. Fahimian, D. Adhikari, J. Raghavan, R. P. Wool
View Full
Article
top
Influence of fibers modification on biocomposite
properties
M. Kozlowski, A. Iwanczuk, A. Kozlowska, S. Frąckowiak
View Full
Article
top
Effect of yarn twist on Young's modulus of fully-green
composites reinforced with ramie woven fabrics
R.Nakamura, H. Nomura, K. Goda, J. Ohgi
View Full
Article
top
Statistical behaviour of hemp and sisal fiber reinforced
polypropylene composites
L. Guillaumat, C. Baley
View Full
Article
top
Aligned flax fibre/polylactate composites - a materials
model system to show the potential of biocomposites in
engineering applications
B. Madsen, H. Lilholt, A. Thygesen, E. Arnold, B. Weager,
R. Joffe
View Full
Article
top
Environmental degradation of stereocomplex-type
polylactic acid fiber
K. Tanaka, T. Kawasaki, T. Katayama, S-H. Hyon
View Full
Article
top
Thermal and mechanical properties of PP/EVA/WP and
MAPP/EVA/PP polymer blend composites
D. G. Dikobe, A. S. Luyt
View Full
Article top
BioCOMP
Starch acetate n-fibre composites
N. Kalle
View Full
Article
top
Development of high performance furan-based
bio-composites for vehicle panels
S. Giannis, E. Arnold, H.E. Hoydonckx, B.M
Weager, R.H. Martin
View Full
Article top
Ceramic composites
Behaviours of SiC fibres and SiC cvi matrix
C.Colin, L. Gélébart
View Full
Article
top
Damage evolution and anisotropy in freeze cast metal/ceramic
composites: an in-situ SEM analysis
S. Roy, B. Butz, A. Wanner
View Full
Article
top
3D-porosity structural analysis of long - fiber -
renforced ceramic matrix composites using X-ray tomography
A. Morales-Rodríguez, P. Reynaud, G.Fantozzi, J.
Adrien E. Maire
View Full
Article
top
Numerical homogenization of the elastic behaviour of SiC/SiC
composites at the scale of the tow: representative volume
element, effective behaviour and stress concentrations
G. Lionel, C. Colin
View Full
Article
top
Effect of the fiber/matrix interface on the in situ fiber
performance of PIP-SiC/SiC composite
K Konaka, M. Kotani, H. Hatta, S. Ogihara
View Full
Article
top
Thermally conductive, tough silicon carbide composite
attempting to mimic nature with high strength up to 1600C in
air
T. Ishikawa
View Full
Article
top
The influence of aspect ratio of reinforcing fibers on
mechanical properties of gypsum matrix composite panels
H. Elahi, A.S. Motevasseli, J. Aghazadeh
View Full
Article
top
Static fatigue of multifilament tows at high
temperatures above 900°C
A. Laforêt, J. Lamon
View Full
Article
top
Toward a virtual material for lifetime prediction of
CMCs
[317] M. Genet, P. Ladevèze, G. Lubineau, E.
Baranger, A. Mouret
View Full
Article
top
Oxide fibres for heat resistant composites
S.T. Mileiko, V.M. Kiiko, A.A. Kolchin, A.V. Serebryakov,
A.N. Tolstun, N.I. Novokhatskaya
View Full
Article
top
The role of a polymer-derived matrix on the tensile
performance of SiC/SiC composite
[321] M. Kotani, T. Ogasawara, H. Hatta
View Full
Article
top
Identification and validation of a multi-physic macro
model for the lifetime prediction of self-healing ceramic
matrix composites
[313] E. Baranger, C. Cluzel, P. Ladevèze, A.
Mouret
View Full
Article top
Damage and fracture
Analytical
methods for the stress concentration analysis of
multilayered anisotropic composites with pin-loaded holes
W Hufenbach, B Grüber, M Lepper,
B Zhou
View Full
Article
top
Compressive
properties of impact damage in composite laminates
determined by an inverse method
P. Sztefek, R. Olsson
View Full
Article
top
A computational
model for failure in composite laminates including
delamination, interfiber failure at fibre failure
F. P. van der Meer L. J. Sluys
View Full
Article
top
Numerical and
experimental deformation and failure analysis of 3D-textile
reinforced lightweight structures under impact loads
W. Hufenbach, M. Gude, A. Hornig, R. Böhm,
M. Zscheyge
View Full
Article
top
Micromechanical finite
element study of impact damaged fractured fibres under
compression
R. Craven, R. Olsson, B.G. Falzon
View Full
Article
top
Scaling
effects in notched composites
M. R. Wisnom, S. R. Hallett, B. G. Green, W.
Jiang
View Full
Article
top
Failure
criteria for composite materials under multiaxial stress
states
[506] E. Totry, C. González, J LLorca
View Full
Article
top
Strength and
fatigue analysis of assembled components in SMC composite
using principal strain history
M. Oldenbo
View Full
Article
top
Characterisation
of bridging tractions in mode-I delamination using
distributed strain measurements and numerical modeling
L. Sorensen, J. Botsis, Th. Gmür, J. Cugnoni, L.
Humbert
View Full
Article
top
Introduction
to the characterization of hygrothermal microcracking of
composites reinforced by stitched non-woven UD laminas
P.J. Liotier, A. Vautrin, P. Henrat
View Full
Article
top
Evaluation of
anisotropic deformation and fracture properties in extruded
HAp/PLLA composites
M. Tanaka, H. Tanaka, M. Hojo, T.A. S-H Hyon, M.
Konda
View Full
Article
top
Physical
mechanisms associated with initiation and propagation of
kink-bands
R. Gutkin, S. T. Pinho, P. Robinson, P.T. Curtis
View Full
Article
top
A
pressure-dependent constitutive model with failure for
laminated composites
S.T. Pinho, R. Darvizeh, P. Robinson, P.P.
Camanho
View Full
Article
top
Experimental
and numerical analysis on delamination growth in damaged
composite material
C. Huchette, F. Guinot
View Full
Article
top
Semi-analytical
approach for the simulation of delamination growth under
quasi-static and cyclic loading
G. Wimmer, H.E. Pettermann
View Full
Article
top
A static
compressive strength model for damaged composite laminates
A.T. Rhead, R. Butler
View Full
Article
top
Validation of
the damage mesomodel for laminated composites
A.C. Galucio, P.M. Mohite, G. Lubineau, P.
Ladevèze
View Full
Article
top
Fracture
mechanics analysis of single fiber fragmentation test
F. A.Ramirez, B.A Acha, L.A Carlsson
View Full
Article
top
Very high
resolution computed tomography of damage in laminated
composites
A. Moffat, P. Wright, J-Y Buffière, I. Sinclair,
M. Spearing
View Full
Article
top
Fracture
behavior of CFRP laminate under artificial lightning strike
Y. Hirano, S. Katsumata, Y. Iwahori, H. Hatta,
A. Todoroki
View Full
Article
top
Dynamic
analysis of degradation in e-glass reinforced epoxy
composite
S. Hamdi, R. Akkerman
View Full
Article
top
Cohesive
mixed-mode damage model applied to the simulation of the
mechanical behaviour of a repaired sandwich beams
D.A. Ramantani, R. D.S.G. Campilho, M. F.S.F.
de Moura, A.T. Marques
View Full
Article
top
Micromechanical vs lamina based failure theories
J. A. Holmberg, P. Lundmark, D. Mattsson
View Full
Article
top
Delamination
modelling using an element free galerkin approach
E. Barbierie, M. Meo
View Full
Article
top
A ply scale
non local approach to describe the failure of laminated
structure
S. Miot, C. Hochard, N. Lahellec, F. Mazerolle
View Full
Article
top
Delamination
growth and fibre/matrix progresive damage in composite
plates under compression
E. Pietropaoli, A. Riccio, M. Arrelli
View Full
Article
top
A model for
predicting multiscale crack growth due to impact in
heterogeneous viscoelastic solids
D.H. Allen, R. Soares, F. Souza
View Full
Article top
Damage Mechanics symposium
Approximate method of predicting ply crack formation in
general symmetric laminates subject to combined biaxial
loading and bending
L.N McCartney
View Full
Article
top
Matrix cracking and delamination in cross-ply laminates:
effect of randomness
Zahid R. Khokhar, I.A. Ashcroft, V.V. Silberschmidt
View Full
Article
top
Intralaminar fatigue crack initiation and growth in
off-axis plies of composite laminates
N. Vrellos, L. Crocker, S. L. Ogin, P. Smith
View Full
Article
top
Fiber bridging in GFRP composites: mesomechanical
analysis
L. Mishnaevsky, Jr. P.l Brøndsted
View Full
Article
top
Effect of curing stresses on the inter-fibre failure
under transverse compression
E. Correa, F. París, V. Mantič
View Full
Article
top
Debond crack growth in fatigue along fiber in UD
composite with broken fibers
J Varna, J Eitzenberger
View Full
Article
top
Secondary damage modes in laminates initiated by
intralaminar cracks
D.T.G. Katerelos, J. Varna
View Full
Article
top
Predicting the residual stiffness properties of carbon
fibre/epoxy laminates loaded in thermal fatigue
C. Soutis, M. Kashtalyan
View Full
Article
top
Crack's propagation in short steel fiber reinforced
concrete. Modeling and experimental investigation
[2632] A. Krasnikovs, O.Kononova, A. Pupurs
View Full
Article
top
Study of the displacement field on the edge of cracked
laminated composites
[607] L. Farge, Z. Ayadi, J. Varna
View Full
Article top
Durabilty and ageing
Benzoxazine Chemistry: A New Material to meet Fire
Retardant Challenges of Aerospace Interiors applications
P. Tsotra, F. Setiabudi, U. Weidmann
View Full
Article
top
Analysis of hygrothermal effects on the compressive
strength of CFRP laminates
C. Soutis
View Full
Article
top
Seawater ageing of low styrene
emission resins for marine composites: mechanical behaviour
and nano-indentation studies
R. Maurin, Y. Perrot, A. Bourmaud, P.Davies, C. Baley
View Full
Article
top
Coupled mechanical-chemical simulation of an oxidized
CFRP composite
L. Olivier, J.C. Grandidier, M.C. Lafarie-Frenot
View Full
Article top
Experimental techniques
Nanotube composite coatings as strain sensors on glass
fibres in epoxy composites
P. Sureeyatanapas, M. Hejda, S.J. Eichhorn, R.J. Young
View Full
Article
top
Direct measurement on fracture toughness of carbon fibre
Y. Kogo, Y. Imafuku, S. Ogihara
View Full
Article
top
Novel image analysis procedure for measuring fibre
misalignment in unidirectional fibre composites
K.K. Kratmann, M.P.F Sutcliffe, L.T. Lilleheden, R. Pyrz,
O.T. Thomsen
View Full
Article
top
Spatial property characterisation of GFRP panels
S. Sriramula, M.K. Chryssanthopoulos
View Full
Article
top
Effect of geometry on the strain distribution in
composite cruciform specimens under biaxial loading
E. Lamkanfi, W. van Paepegem, J. Degrieck, A. Makris, C.
Ramault, D. van Hemelrijck
View Full
Article
top
Through-the-thickness material properties identification
using 3D-DIC and FBG measurements
M. Mulle, R. Zitoune, F. Collombet, P. Olivier, L.
Robert, Y-H. Grunevald
View Full
Article
top
Composite materials characterization by acoustic
emission technique
V. Lopresto, C. Leone, G. Caprino and I. de Iorio
View Full
Article
top
Design and analysis of a compact tension (CT) specimen
for intralaminar fracture toughness characterisation of
woven composite laminates
N. Blanco, S.T. Pinho, P. Robinson
View Full
Article
top
Development of test methods for adhesion measurements of
flexible elastic materials
V. Tamuzs, S. Tarasovs, U. Vilks, I. Rumkovska
View Full
Article
top
Investigation of testing mechanisms by doping of bonding
surfaces with nano particles
R. Schledjewski
View Full
Article
top
Characterisation of a composite material: needs and
methodologies
M. Jacquesson
View Full
Article
top
Strain distribution in a biaxially loaded curciform
composite specimen
C. Ramault, A. Makris, D van Hemelrijck, E. Lamkanfi, W
van Paepegem
View Full
Article
top
Evaluation of environmental effects on polymer matrix
composites by micromechanical and macromechanical tests
F.A Ramirez, L.A Carlsson, B.A Acha
View Full
Article
top
Interfacial strength evaluation in a glass fiber
reinforced composite using cruciform specimen method
S. Ogihara, Y. Sakamoto, H. Kato, S. Kobayashi, I. Ueno
View Full
Article top
Fatigue
A clamped three-point bending setup for fatigue of thin
composite laminates
I De Baere, W van Paepegem, J Degrieck
View Full
Article
top
Modelling mode i crack initiation in composites under
fatigue loading using interface elements
M. May, S.R. Hallett
View Full
Article
top
Cyclic loading of the interphase in single fibre model
composites
H M. Brodowsky, E. Mäder
View Full
Article
top
Fatigue properties of highly oriented polypropylene
tapes and all-polypropylene composites
N-M. Barkoula, B. Alcock, N.O. Cabrera T. Peijs
View Full
Article
top
Damage
evolution in composite bonded joints under fatigue loading
M. Lusiani, G. Meneghetti, M. Quaresimin, M. Ricotta
View Full
Article
top
Multi-stage fatigue life monitoring on carbon fibre
reinforced polymers enhanced with multi-wall carbon
nanotubes
V. Kostopoulos, A. Vavouliotis, P. Karapappas, T. Loutas,
T. Voyatzi, A. Paipetis
View Full
Article
top
Assessment of the applicability of
compression-after-after-impact (CAI) and open-hole tension (OHT)
methods for use under fatigue loading
M. R. L. Gower, R.M. Shaw
View Full
Article
top
Experimental identification of fatigue damage model for
short glass fibre reinforced thermoplastic composites
H. Nouri, C. Czarnota, F. Meraghni, P. Lory
View Full
Article
top
High strain measurements during fatigue cycling in fibre
reinforced thermoplastic composites using imbedded draw
tower fibre Bragg grating sensors
E. Voet, G. Luyckx, I. De Baere, J. Degrieck, H. Bartelt,
J. Vlekken, E. Jacobs
View Full
Article
top
Biaxial mechanical fatigue using cruciform composite
specimens
A. Makris , C. Ramault , D. van Hemelrijck, E. Lamkanfi,
W van Paepegem
View Full
Article
top
Modelling fatigue life of composite laminates with anfis
V. Anastasios
View Full
Article
top
The effect of tension-tension fatigue and lay-up
configuration on damage accumulation in carbon/epoxy
composites
M.Henzel, M.Scheerer, A.Pönninger, E.Ladstaetter
View Full
Article
top
Influence of voids on the degradation of CFRP under
fatigue loading
F. Gehrig, K. Schulte
View Full
Article
top
A modified three-rail shear test for fatigue of
composite laminates
I. De Baere, W. van Paepegem, J. Degrieck
View Full
Article
top
Multiaxial fatigue behaviour of a short-fibre reinforced
polyamide 6.6 in the presence of notches
M. De Monte, E. Moosbrugger, M. Quaresimin
View Full
Article top
Impact
Impact behavior of automotive shock absorbing beam:
experimental and numerical representation
B. Lascoup, P. N'Diaye
View Full
Article
top
Simplified model for large mass impact and delamination
onset in curved laminates
R. Olsson
View Full
Article
top
Impact and post-impact properties of carbon fibre
non-crimp fabric composites
K. Vallons, A. Behaeghe, S. V. Lomov, I. Verpoest
View Full
Article
top
Evaluation of impact damage behavior of repeatedly
impacted composites embedding steel and shape memory alloy
fibres
S. Pappadà, R. Rametta, M. Manca, F. Montagna, A.
Maffezzoli
View Full
Article
top
Evaluation and validation of multi-physics fe methods to
simulate bird strike on a wing leading edge
M. Guida, F. Marulo, M. Meo, M. Riccio
View Full
Article
top
Nano-enhanced impact properties of carbon fibre
reinforced composites
V. Kostopoulos, A. Baltopoulos, P. Karapappas, A.
Vavouliotis and A. Paipetis
View Full
Article
top
Effects of CFRP laminate thickness on the bending after
impact strength
S. Nilsson, A. Bredberg, L. Asp
View Full
Article
top
Modelling of impact damage in laminated composites
C. Bouvet, B. Castanié, J-J. Barrau
View Full
Article
top
Impact resistance of all-polypropylene composites
composed of alpha and beta modifications
T Bárány, J. Karger-Kocsis
View Full
Article
top
Meso scale analysis of damage and stiffness degradation
in ncf composites
D. S. Ivanov, S. V. Lomov, T. T. Chi, D. Klimshin, I.
Verpoest
View Full
Article
top
Understanding the impact performance of injection
moulded long fibre reinforced polyamide
J. Thomason
View Full
Article top
Infrastructure
Behavior of full-scale shear deficient corner RC
beam-column connections retrofitted with CFRP sheets
Y.A. Al-Salloum
View Full
Article
top
Design of a bonded anchorage for composite plates:
influence of the adhesive plasticity
S. Chataigner, J.F. Caron, C. Aubagnac
View Full
Article
top
Lifetime prediction of polymer-matrix composite
structures for civil engineering applications
R.M. Guedes
View Full
Article
top
Impact resistance of load bearing sandwich elements with
textile reinforced concrete faces
H. Cuypers, J. van Ackeren, B. Belkassem, J. Wastiels
View Full
Article
top
Compressive behavior of CFRP-confined square concrete
columns
E. Zīle, V. Tamuzs R. Tepfers
View Full
Article
top
Design methods for composite reinforced metallic beams
D. Linghoff, A. André
View Full
Article
top
Performance monitoring of reinforced concrete wrapped
with FRPS
H. Karpate, H.G. Wheat, J.O. Jirsa, D.W. Fowler, and D.P.
Whitney
View Full
Article top
Interphases and matrices
Chemical monitoring of composite matrices by evanescent
wave spectroscopy
P.B.S. Bailey, S.A. Hayes, R J.Hand, B. Zhang
View Full
Article
top
Optimisation of interfacial properties for tensile
strength by plasma polmerisation
T. J. Swait, C. Soutis, F. R. Jones
View Full
Article
top
Multiscale interphase investigation of sized glass fibre/thermoset
composite
B. Heman, L. Belec, J.F. Chailan
View Full
Article
top
Anisotropy of reinforcement fibres and its influence on
the apparent interfacial shear strength in thermoplastic
composites
J. Thomason
View Full
Article top
Joint and bearing
Simulation of progressive damage in bolted composite
joints
H. Koerber, P.P. Camanho
View Full
Article
top
Hybrid composite laminates for high-performance bolted
joints
P.P. Camanho, A. Fink, S. Pimenta, A. Obst
View Full
Article
top
Definition of a simple test to characterize the
non-linear shear behaviour of the adhesive in an assembly
J.Y. Cognard, R. Créac'hcadec, L. Sohier, P. Davies
View Full
Article
top
Progressive damage and strength of
bolted joints in composite structures
F-X. Irisarri, F. Laurin, N. Carrere, J.-F. Maire
View Full
Article
top
Experimental analysis and modeling of
z-pinned joints under pull-out loading
J.T. Vazquez, B. Castanie, J.J. Barrau,
S. Didierjean
View Full
Article
top
Crack propagation assessment in
composite bonded joints
M. Lusiani, G. Meneghetti, M. Quaresimin, M. Ricotta
View Full
Article
top
Failure of adhesively bonded joints. Analysis of
experimental results by analysis of experimental results by
nominal and local approach
A. Barroso, F.París, V. Mantič
View Full
Article
top
The optimised post-fitted foam sandwich insert
H. Johansson
View Full
Article top
Mechanical properties
Bending of tip-loaded CFRP stiffened pultruded GRP
cantilevers: comparison between theory and experiment
G.J. Turvey
View Full
Article
top
E-commerce with serving manufacturing know-how for glass
fiber
R. Takeda, Y. Kobayashi, M. Moriyama, K. Yoneda, S.
Han, T. Shimosakon, S. Tamura
View Full
Article
top
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
M. Thomas, N. Boyard, L. Perez, Y. Jarny, D. Delaunay
View Full
Article
top
Assessment of mixed uniform boundary conditions for
predicting the macroscopic mechanical behavior of composite
materials
D.H. Pahr, H.J. Bohm
View Full
Article
top
Strength analysis of composite structures with
uncertainty assessment
F. Laurin, N. Carrere, J.-F. Maire
View Full
Article
top
Back stresses in creep of 2024Al-saffil fibre composite
F. Dobes, K. Milička
View Full
Article
top
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
M. Thomas, N. Boyard, L. Perez, Y. Jarny, D. Delaunay
View Full
Article
top
Predicting the properties of particulate composites-
theory and experimental verification
A. Kelly, L. N. McCartney
View Full
Article
top
Contribution of damage mechanisms comprehension of
interlock-reinforced composite materials.
J. Schneider, Z. Aboura, K. Khellil, M.L Benzeggagh, D.
Marsal
View Full
Article
top
Micromechanics of composites with integrated shear
thickening fluids
C. Neagu, C. Fischer, P-E Bourban, J-A.E. Månson
View Full
Article
top
Mechanical properties of CFRP-laminates with the
dependency of size/resin compatibility and processing
parameters
G.A. Antonsen
View Full
Article
top
Modelling of open-cell cellular solids at finite
deformations
F. Dau, A. Alzina, L. Guillaumat
View Full
Article
top
An enhanced computational micromodel for CFRP laminates
M. Trovalet, P. Ladevèze, G. Lubineau
View Full
Article
top
Multiscale modelling of fibre reinforced composites
J. P. Foreman, S. Behzadi, D. Porter, P. T. Curtis, F. R.
Jones
View Full
Article
top
Predictive analyses and experimental validations of
effective elastic properties of 2D and 3D woven composites
S. V. Lomov, A. E. Bogdanovich, D. Mungalov, D. Ivanov,
I. Verpoest, M. Zako, T. Kurashiki, H. Nakai
View Full
Article top
Metal matrix composites
Massive composite material on the basis of iron
O. Figovsky,S. Usherenko, S. Valery
View Full
Article
top
Study of the grindability of powder metallurgically
produced aluminum metal matrix composite (Al - MMC)
M.A. Shahzad, J.C. Aurich
View Full
Article
top
Microstructurally inhomogeneous composites with tailored
reinforcement distribution
H.X. Peng, L. Yin
View Full
Article
top
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
P.Egizabal, M. García de Cortazar, J.F.Silvain, J. Douin,
A. Torregaray
View Full
Article
top
Creep of Ax41 magnesium alloy matrix composites with
alumina and carbon short fibers
K. Milička, F. Dobes
View Full
Article
top
High-power diode laser welding of highly reinforced
Al-SiC composites
J. Rams, M. Ferrer, C.J. Múnez, A. Urena
View Full
Article
top
Ni3Al-Mo multilayer composites: manufacture, structure,
properties
K.B.Povarova, V.I Burmistrov, A.V Antonova, O.A Skachkov,
M.V Kiiko
View Full
Article top
Modelling
An automated image analysis method for measuring fibre
contact in fibrous and composite materials
F. Malmberg, J. Lindblad, C. Ostlund, K. M. Almgren, E.
K. Gamstedt
View Full
Article
top
Geometrical modelling of 3D textile composite
application to warp interlock carbon fabrics
S. Nauman, F. Boussu, X. Legrand V. Koncar
View Full
Article
top
Determination of material parameters of a textile
reinforced composite using an inverse method
J. Blom, H. Cuypers, P. van Itterbeeck, J. Wastiels
View Full
Article
top
Prediction of deformation and biaxial strength of fibre
reinforced laminates for wwfe by using micromechanics
S. B. Sapozhnikov, S. I. Cheremnykh, A. G. Maslakova
View Full
Article
top
Mechanical characterization of polymerics composites
winding in diverse reinforced orientation of the
reinforcement
G. Marinucci, E. da S. Leitão, O. de Carvalho
View Full
Article
top
Numerical estimates of composite sandwich response to
quasi static impact
A. Zinno, C. E. Bakis, A. Prota
View Full
Article top
Nano symposium
Effect
of temperature, moisture and strain rate on limits of linear
viscoelastic behaviour of polyamide 66 filled with TiO2
nanoparticles
O. Starkova, Z. Zhang, H. Zhang
View Full
Article
top
Synthesis, characterization, and thermal properties of
bridged polysilsesquioxanes-molecular nanocomposites
C-L Chiang, R-C Chang
View Full
Article
top
The incorporation of carbon nano fibres to enhance the
properties of hot compacted self-reinforces single polymer
composites
R.J. Foster, P.J. Hine, M. J. Bonner, I.M. Ward
View Full
Article
top
Combining hardness and flexibility in coatings based on
nanoparticle-filled hyperbranched polymers
L. Fogelström, E. Malmström, M. Johansson, A. Hult
View Full
Article
top
Influence of van der Waals interaction on the mechanical
properties of single-walled carbon nanotubes with
introducing effective wall thickness
K. Yazdchi, M. Salehi, M.M. Shokrieh
View Full
Article
top
Surfactant modified cnt/epoxy nanocomposites for
improved mechanical and functional properties
Y. Geng, M.Y. Liu, J.
View Full
Article
top
Hierarchical composites with carbon nanotube grafted
fibres
H. Qian, A. Bismarck, E.S. Greenhalgh, M.S.P. Shaffer
View Full
Article
top
Damage sensing with nanocomposite/glass-fibre hybrid
composites via electrical conductivity methods
L. Böger, L.O. Meyer, M.H.G. Wichmann, K.
Schulte
View Full
Article
top
Carbon nanofibers reinforced adhesives for joining
carbon fiber epoxy composites
A. Ureña, M.R. Gude, J. Sánchez, S.G. Prolongo
View Full
Article
top
Development and characterization of ptfe
nanopowder-elastomeric composites for tribological
allpications
M. Sohail Khan, D. Lehmann, G. Heinrich, R. Franke
View Full
Article
top
Application of polymeric nano composites at low earth
orbit and geosynchronous earth orbit
S. Bhowmik, R. Benedictus, H.M.S. Iqbal, M.I. Faraz
View Full
Article
top
Manufacture methods comparison and characterization of
conductive glass reinforced plastics by adding carbon
nanofibres
M.I. Barrena, J.M.G de Salazar, C. Merino, O. Plaete, G.
Morales
View Full
Article
top
Improved techniques for obtaining polymer-nanodiamond
composites with enhanced properties
V.V. Karbushev, V.G. Kulichikhin, A.V. Semakov, I.I.
Konstantinov, S.V. Kotomin, V.A. Popov
View Full
Article
top
Epoxy/ayered-silicate nanocomposites: effect of the
matrix composition on large deformation and fracture
behaviour
S. Pandini, F. Baldi, R. De Santis, F. Bignotti
View Full
Article
top
Molecular dynamics modeling in hybrid fibre polymer
composites
B-S Lee, H-D Bak, W-R Yu
View Full
Article
top
Functional properties of nanocomposite epoxy matrix
systems for strain-sensing applications
M.H.G. Wichmann, J. Gehrmann, S. T. Buschhorn, L. Böger,
K. Schulte
View Full
Article
top
Polyaniline modified nanocellulose as reinforcement of a
shape memory polyurethane
M.I. Aranguren, M. L. Auad, T. Richardson, S. Adanur, W.J.
Orts, E.S. Medeiros, L.H.C. Mattoso, M.A. Mosiewicki, N. E.
Marcovich
View Full
Article
top
Viscosity of chitosan/montmorillonite mixtures for
coatings for paperboard packages
M. Gällstedt, L. Öberg, H. Nilsson, P. Berglund
View Full
Article
top
Modelling of effective elastic properties of composite
containing nanoparticles with an inhomogeneous interphase
Т. Glaskova, A. Aniskevich
View Full
Article
top
Polymer composite nanofibres
R. J. Young, P. Kannan, S. J. Eichhorn
View Full
Article
top
Characterization of melt compounded polyamide titanium
dioxide nanocomposites: comparison between novel atomic
layer deposition coated
K. Nevalainen, C. Hintze, J. Sundelin, J.
Vuorinen, P. Järvelä, N. Isomäki
View Full
Article
top
Hardness and tensile strength study on Al356 alloy
matrix-nano Al2O3 particle reiforced
composite
A. Mazahery, H. Abdizadeh, H. R. Baharvandi
View Full
Article
top
Property improvement and degradability control of
polyolefin based composites containing natural fibres and
mineral fillers
M. Pracella, C. Pancrazi, A. Pastena, A. Corti, E.
Chiellini
View Full
Article
top
Preparation and characterization of exfoliated ldpe/organolaponite
nanocomposites
A.Giannakas, C.G.Spanos, P.Xidas, K.S.Triantafyllidis,
A.Ladavos
View Full
Article
top
Carbon nanotubes-reinforcing mgo-doped Al2O3
nanocomposites
I. Ahmad, H. Cao, H. Chen, A. Kennedy, H. Zhao,Y. Zhua
View Full
Article
top
Damage detection in carbon fibre cross-ply laminates by
aid of carbon nanotube doped resin
P. Fernberg and R. Joffe
View Full
Article
top
Processing using reactive amphiphilic molecules,
characterization and properties of double-walled carbon
nanotubes filled epoxy nanocomposites
I. Elsawi, P. Olivier, P. Demont, C. Laurent, A Peigney
View Full
Article
top
Bio-degradable sintered composites of PLA and HA in
scaffolds
E. Ghassemieh
View Full
Article top
Process simulation
Modelling and simulation of the rheology of bulk
moulding compounds (BMC) during mould filling
P.J.J. Dumont, O. Guiraud, L. Orgéas, T-H Le, D. Favier
View Full
Article
top
Two-phase continuum modelling of composites
consolidation
M. Wysocki, L.E. Asp, S. Toll, R. Larsson
View Full
Article
top
Modelling the development of warpage in composite car
body panels during curing
M. S. Kiasat, H. Mostofi, R. Marissen
View Full
Article
top
Methodology for applying computational techniques in the
advanced manufacture of composites through artificial vision
[1610] N. Montés and F. Sánchez
View Full
Article
top
Simulating and validating the draping of woven fibre
reinforced polymers
K. Vanclooster, S.V. Lomov, I. Verpoest
View Full
Article
top
Investigation of the relaxed shape of partly cured
thermoset composite materials
J. M.Svanberg, G. Nilsson
View Full
Article
top
Reduction of risk and uncertainty in
composites processing using process modelling and Bayesian
statistics
G. Fernlund
View Full
Article
top
Prediction and characterization of the resin flow and
the fibrous preform behaviour during liquid resin infusion (LRI)
A. Vautrin
View Full
Article
top
On the multi-scale modelling of the manufacturing of a
thick walled composite panel- theoretical and experimental
study
P. Fideu, P. Zahlen, C. Heim, A. Herrmann, P. Baisch
View Full
Article
top
A simplified method for predictions of shape distortions
T. Nyman, M. Svanberg, E. Hörberg
View Full
Article top
Processing and manufacturing technologies
Manufacturing method for symmetric laminates from
improved stitch bonded multi-plies
J. Hausding, C. Widulle, C. Paul, C. Cherif
View Full
Article
top
Cross-point binders for glass fiber mat utilizing
electronic ion effect
S. Tamura, Z. Wu, Y. Zhu, Y. Nishino
View Full
Article
top
Developing the next generation of self-reinforced
polymer composites
I.M. Ward, A.P. Unwin, P.J. Hine, M.J. Bonner
View Full
Article
top
Investigation of preform manufacturing techniques using
novel binder coated carbon fibre tows
M. Asareh, A.R. Mills, D.D.R. Cartié
View Full
Article
top
Improvement of moisture barrier properties of CFRP for
high-precision engineering applications through silicon-like
hybrid films prepared by plasma enhanced chemical vapour
deposition
A. Merlo, A. Cremona, E. Vassallo, L. Laguardia, S. Phani
, J. Steidl
View Full
Article
top
Bismaleimide composites: unusual processing techniques
H.D. Stenzenberger, S.E. Evsyukov, T. Pohlmann
View Full
Article
top
Process parameters for induction welding of metal/composite
joints
P. Mitschang, R. Velthuis
View Full
Article
top
Ultrasonic consolidation as novel manufacturing
technique in embedding passive/active fibres in metal
matrices
M. A. Siddiq, E. Ghassemieh
View Full
Article
top
Automated production of complex CFRP-components
R. Sundermann
View Full
Article
top
Ultrasonic welding of thermoplastic composites, modeling
of the process
A. Levy, S. Le Corre, A. Poitou, E. Soccard
View Full
Article
top
Machining of UD- CFRP composites: experiments and finite
element modeling
G.V. Rao, P. Mahajan, N. Bhatnagar
View Full
Article
top
Numerical simulations of metal onto composites casting
E. Marklund, D. Mattsson, M. Svanberg, M. Wysocki
View Full
Article
top
Design and fabrication of vartm fabricated skin panels
with integrated hollow hat stiffeners
D. Heider, P. Schulze, H. Deffor, J. Tierney, and J.W.
Gillespie, Jr.
View Full
Article
top
Enhancement of the side emission efficiency of
commercial PMMA optical fibres in the UV-A and visible blue
spectrum for photocuring of epoxy resins
A. D. Alobaidani, D. Furniss, A. Endruweit, M. S.
Johnson, T. Benson, A. B. Seddon
View Full
Article
top
On the interply friction of different generations of
unidirectional prepreg materials
Y. Larberg, M. Åkermo
View Full
Article
top
Potentiality of optical fibre bragg grating sensors for
resin transfer moulding process monitoring
R. de Oliveira, M. Nordlund, V. Michaud, J-A. E. Månson
View Full
Article
top
Structure and properties of laminates manufactured using
the quickstep technique
R. Day
View Full
Article
top
Effects of dual cure and surface treatments on coating
adhesion to different smc-substrates
S. M. Trey, M. Lundström, D. Ståhlberg, M. Johansson
View Full
Article
top
Fabrication of injected pultruded profiles
P. Nóvoa
View Full
Article
top
Abrasive-water-jet machining of polymer composite
materials
F. Cénac, F. Collombet, R. Zitoune M. Déléris
View Full
Article
top
Microstructure and tensile properties of extruded 7475
Al-Al2O3 particle composites
A. Daoud, W. Reif, P. Rohatgi
View Full
Article
top
In situ and quantitative control of resin transfer
moulding (RTM) using fibres optic sensors
X.A. Aduriz, C. Lupi, N. Boyard, J.L. Bailleul, D. Leduc,
D. Delaunay C. Boisrobert
View Full
Article
top
Influence of manufacturing on the critical machining
parameters during drilling
R. Zitoune, F. Collombet
View Full
Article top
Recycling
Recyclate fibres -matrix interface analysis for reuse in
sheet mould compounds (SMC)
J. Palmer, O. R. Ghita, L. Savage, K.E. Evans
View Full
Article
top
Composites from ground tyre rubber. effect of surface
modification by wetting additives
J. Cañavate, P. Casas, F. Nogués, F. Carrillo, X. Colom
View Full
Article top
Sandwich symposium
Experimental and theoretical investigation of thermal
stress in CFRP-Foam-
sandwich structures
M. Rinker, M. Gutwinski, R. Schäuble
View Full
Article
top
Throug-thickness shear testing of Divinycell H130 foam
H. Toftegaard
View Full
Article
top
Three-dimensional open-cellular materials formed from
self-propagating polymer waveguides
A.J. Jacobsen, W. Barvosa-Carter, S. Nutt
View Full
Article
top
Strength and stiffness of fiber-reinforced,
particulate-matrix composites
V. Birman
View Full
Article
top
Free
vibrations of sandwich panels with a transversely flexible
core and temperature dependent core properties
O.T. Thomsen, Y. Frostig
View Full Article
top
Formable
sandwich cores with non-conventional cell shapes
S. Nutt, C. Huang
View Full
Article
top
Modelling sandwich failure under
blast loads
C. van Hof, A.G. van Erkel, A.W.J. Gielen
View Full
Article
top
Ballistic limit for oblique impact of thin sandwich
panels and multi-layered plates
D.W. Zhou, W.J. Stronge
View Full
Article
top
Simulated properties of hollow pyramidal lattice truss
structures
S. Pingle, N. Fleck
View Full
Article
top
Transient response of a three layer sandwich plate with
J. Rezaeepazhand
View Full
Article
top
The application of particle swarm
optimisation to sandwich material design
C.W. Hudson, J.J. Carruthers, A.M. Robinson
View Full
Article
top
Wrinkling stresses in honeycomb sandwich panels using
discrete and continuum core representations
R.A Staal, D.P.W Horrigan, G.D Mallinson
View Full
Article
top
Acoustics of sandwich structures - an overview
S. Nutt, C. Huang, P. Peters, C. Naify
View Full
Article
top
Analysis of cylindrical sandwich shells using a mesless
method and an optimization thecnique
C.M.C. Roque, A.J.M. Ferreira, R.M.N. Jorge
View Full
Article
top
Indentation energy in bending of sandwich beams with
composite laminated faces and foam core
M. Sadighi, H. Pouriayevali, M. Saadati
View Full
Article
top
Numerical study of the effect of a core-adjacent layer
of polyurea on the blast energy absorption of a sandwich
T-joint
L.A. Louca, A. Soleiman Fallah, M. Saunders, A. Groves
View Full
Article
top
Acoustics of sandwich structures - an overview
S. Nutt, C. Huang, P. Peters, C. Naify
View Full
Article
top
Fatigue debond growth in sandwich structures loaded in
mixed mode bending (MMB)
A. Quispitupa, C. Berggreen, L.A. Carlsson
View Full
Article
top
Simulation of the damage tolerance
behaviour of CFRP/honeycomb sandwich based on measured
properties of the resin impregnated core paper
F.Hähnel, K. Wolf
View Full
Article
top
A study on residual strength of al honeycomb core
sandwich composite panel after quasi-static indentation
damage
C. Kong, H. Park, S.Lee
View Full
Article
top
Experimental study of sandwich panel under impact
loading
I.Nasri, H.J.Li, H.Zhao
View Full
Article
top
A semi-analytical methodology for the residual strength
prediction of damaged sandwich structures
A. Wetzel, J. Baaran
View Full
Article
top
Numerical modelling of the behavior of thermoplastic
coomposite sandwich structures under localised impact
loading
K. A Brown, R Brooks, N. A Warrior P. Kalandaivdel
View Full
Article
top
Fatigue failure of a composite sandwich beam containing
a central notch
D. T. Fishpool, E. Guidon, B. H. Maedza, J. Maso, S. L.
Ogin, A. M. Thorne, B. H. Le Page, D. A. Jesson
View Full
Article
top
Fast joining and repairing of sandwich materials with
detachable mechanical connection technology
J. Feldhusen, S. Krishnamoorthy
View Full
Article
top
Numerical study of the effect of a core-adjacent layer
of polyurea on the blast energy absorption of a sandwich
T-joint
L.A. Louca, A.S. Fallah, M. Saunders, A. Groves
View Full
Article top
SICOMP 19th annual conference
Alfa Romeo "8c Competizione" all composite body and
interiors
L. Di Cesare, R. Catenaro
View Full
Article
top
Design method of API high pressure FRP pipe
T. Iwatani, M. Nishino, Y. Y. Iguchi, T. Shimosakon, S.
Tamura
View Full
Article
top
Automation from an automotive perspective
K-O. Strömberg, P-J. Lööf, M. Pettersson, M. Plantin B-G.
Rosén
View Full
Article
top
Development of a multifunctional composite fuel cell
C. Hilton, D. Peairs, J. Lesko, S. Case, D. Sitton, R.
Moffitt
View Full
Article
top
Fatigue resistance of composite fibre-metal laminates
subjected to impact loading
R. Starikov
View Full
Article
top
Out of autoclave curing of thermoset materials
A. Butragueño, R Martínez, Á Domínguez, P. Ponsaud, J.
Sánchez Gómez
View Full
Article
top
Testing and analysis of a highly loaded composite flange
N.E. Jansson, A Lutz, M Wolfahrt, A. Sjunnesson
View Full
Article
top
Reasonable knockdown factors for sandwich face sheet
wrinkling
L. Fagerberg, D. Zenkert
View Full
Article
top
Impact behavior and optimum design of CFRP/Al hybridbeam
in side collision of automobiles
G. Ben, N. Sugimoto
View Full
Article
top
Experimental and numerical study of the energy
absorption capacity of pultruded composite tubes
D. Kakogiannis, D. van Hemelrijck, J. Wastiels, S.
Palanivelu, W. van Paepegem, K. de Wolf, J. Vantomme
View Full
Article
top
On a design method of composite stem
based on ct images
M. Zako, T. kurashiki, T. Kawamura, N. Sugano, H.
Yoshikawa
View Full
Article
top
Tool for design and simulation of joints
G. Catalanotti, P. Ghys
View Full
Article
top
"Detect" - a new defect detection method and its use on
sheet moulding compound (SMC) substrates
P. Fernberg, M. Sjödahl
View Full
Article
top
Sonoboard, the next generation formwork sheet
J. Bergendorff
View Full
Article
top
Development of an analysis tool for the design of bonded
composite repairs
R. Creemers
View Full
Article
top
Application of composite materials for lightweight and
smart structures design of high performance milling machines
A. Merlo, D. Ricciardi, F. Aggogeri, F. Meo, L. Le Lay
View Full
Article
top
Design and analysis of a composite energy absorbing
railcab nosecone
[117] C. O'Neill, S. Ingleton, J. Carruthers, M.
Robinson
View Full
Article
top
Time for light weight composite materials to enter the
merchant shipbuilding
S-E Hellbratt
View Full
Article
top
A high-speed craft with composite hull
K. Olofsson, G. Arnestad, A. Lönnö, A. Hedlund-Åström, T.
Jansson, M. Hjortberg
View Full
Article top
Smart composites
Investigation of the interfacial debonding in a shape
memory alloy (NiTi) fibre reinforced epoxy matrix composite
Y. Payandeh, F. Meraghni, E. Patoor, A. Eberhardt
View Full
Article
top
Low temperature moulding of adaptive composites with
embedded shape memory alloy wires
V. Michaud, J. O'Keane, E. Kirkby, R. de Oliveira, J-A.
E. Månson
View Full
Article
top
Self-healing composite sandwich panels
H.R. Williams, R.S. Trask, I.P. Bond
View Full
Article
top
Damage location in complex structures subjected to
multi-modal wave using elliptical algorithm and modified
acoustic emission technique
C.A. Paget, K. Levin
View Full
Article
top
Bioinspired and biomimetic self-healing of advanced
composite materials
R.S. Trask, G.J. Williams, I.P. Bond
View Full
Article
top
Conduction in composites with highly conductive short
fibres: comparison between experiments, discrete element
simulation and analytical solution
J-P. Vassal, L. Orgéas, P. Dumont, D. Favier V. Michaud
View Full
Article
top
Strain measurement of carbon composites using advanced
sensor technology
B.Kim, A. Walker, P.J. Withers
View Full Article
top
Structural health-monitoring of GFRP structures using
embedded fibre Bragg gratings
[2021] P.C. Neves, S.A. Valtierra, F. Araújo, A.
Ferreira, A.A. Fernandes
View Full
Article
top
Nde detection of manufacturing defects in composite
bonded joints using CFGB sensors
J. Palaniappan, T. F. Capell, S. L. Ogin, A. Thorne, A.
Crocombe, G. Reed, S. C. Tjin, L. Mohanty
View Full
Article top
Structural design
Manufacturing process adaptation for the cost/weight
optimization of aircraft structures
M Kaufmann, T Czumanski, D Zenkert
View Full
Article
top
Dimensional and geometrical stability of CFRP laminates
in hostile environment
Y. Arao, J. Koyanagi, S. Takeda, H. Kawada
View Full
Article
top
Contribution to the mechanical-mathematical analysis of
fibre composite stringer stiffened panels
A. Büter, K. Jaschek
View Full
Article
top
Design allowables: considering the tensile and
compressive behaviour of notched and unnotched CFRP
P. Spendley, S.L. Ogin, P.A. Smith, A.B. Clarke
View Full
Article
top
Analysis and manufacturing of ultra thick laminates for
future aircraft applications
Zi. Kristian, M. Siemetzki, D. Zenkert
View Full
Article
top
Experimental and numerical study on
axial crushing behaviour of pultruded composite tubes
S. Palanivelu, R.Verhelst, W.van Paepegem, J. Degrieck,
D. Kakogiannis, D. van Hemelrijck, J. Wastiels, K. de Wolf,
J. Vantomme
View Full
Article
top
Design of composite material for cost
effective large scale production of components for floating
offshore structures
C. Blommaert, J. Degrieck, W. van Paepegem
View Full
Article
top
Buckling of composite plates subjected to shear and
linerly varrying loads
G. Tarján, L. Kollar
View Full
Article
top
Cost efficient composite design methods
M. Hildebrand, H. Katajisto
View Full
Article
top
Mechanical effect and shielding
effectiveness of the insertion of metallic screen in glass
and carbon composite
M. Gresil, P. Parneix, J.L. Boulay, C. Cheype, J.C.
Walrick, B. Lascoup, M. Lemistre
View Full
Article
top
Simultaneous structural and manufacturing optimization
of composite parts using normal constraint method
M. Ghiasi, D. Pasini, L. Lessard
View Full
Article
top
Hydroelastic tailoring and optimization of a composite
marine propeller
Blasques, J. Pedro, C. Berggreen, P. Andersen
View Full
Article
top
Probabilistic methods for structural reliability and
risk
C. Chamis
View Full
Article top
Textile composites
A simplified discrete finite element model for non-crimp
fabric composites
C. Knipprath, A.A. Skordos, A.K. Pickett
View Full
Article
top
Mechanical properties and failure of non-crimp fabric
composites subjected to shear stress
R. Joffe
View Full
Article
top
A proposal of stress/strain analytical procedure of
textile compositess with stitch by m3 method
S. Honda, M. Zako, T. Kurashiki, H. Nakai, S. Lomov, I.
Verpoest
View Full
Article
top
Description and modelling of the multi-axial stiffness
degradation in fatigue loaded NCFs under sequence loading
F. Schmidt, S. Adden, E. Möhle, P. Horst
View Full
Article
top
New developments in the field of ncf technology -
current status and their use in new applications
P. Kipke, D. Möcke, M. Schrief, C. Kissinger
View Full
Article
top
Modelling the seam architectures for textile performing
F.F. Kruse, V. Eckers, F. Henkel, N. Kerman T. Gries
View Full
Article
top
The permeability of random discontinuous carbon fibre
preforms
A. Endruweit, L.T. Harper, T.A. Turner, N. A. Warrior,
A.C. Long
View Full
Article
top
A macroscopic visco-elastic-damage model for three
dimensional woven fabric composites
L. Marcin, N. Carrère, J.-F. Maire
View Full
Article
top
Damage development analysis based on strain energy
release rate for 3-d woven composite
R. Tanaka, N. Watanabe
View Full
Article
top
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
[2209] V. Koissin, J. Kustermans, S.V. Lomov, I.
Verpoest, H. Nakai, T. Kurashiki, K. Hamada, Y. Momoji, M.
Zako
View Full
Article
top
Data bank for validation of finite element analysis of
textiles and textile composites: a proposal
P. Boisse, J. Crookston, D.S. Ivanov, S.V. Lomov, A.
Long, I. Verpoest, J. Whitcomb, M. Zako
View Full
Article
top
A generalized damage model for woven ply laminates under
static and fatigue loads
Y Thollon, C. Hochard
View Full
Article
top
A numerical simulation of damage development for
laminated woven fabric composites
T. Kurashiki, Y. Momoji, H. Nakai, M. Zako
View Full
Article
top
Analysis of the microstructure and deformation of woven
composites using microfocus X-ray diffraction
R.J Young, S-Y. Lei, P. Potluri, S.J Eichhorn, J. A.
Bennett, R.J Davies
View Full
Article
top
Design, manufacture, and analysis of 3D honeycomb
textile composites
[2216] X. Chen, X. Gong, S. Tang
View Full
Article
top
Multiscale analysis of material damping properties for
textile composites
Y. Nakanishi, K. Matsumoto, T. Kurashiki, M. Zako
View Full
Article top
Thermoplastic composites
Fiber orientation at the mid-plane in injection molding
of reinforced thermoplastics
P.Shokri N. Bhatnagar
View Full
Article
top
A study of the rheology, processing and flow induced
mesostructures of glass bead filled polystyrene
P.J.Hine, J.E.Embery M. Tassieri
View Full
Article
top
New thermoplastic matrix composites for demanding
applications
J. P. Nunes, J. F. Silva, C. A. Bernardo, A. T. Marques
View Full
Article
top
The investigation of fibre reinforcement effects in
thermoplastic materials: interfacial bond strength and fibre
end parameter
C.C.Wang, J.L.Thomason, F.R.Jones
View Full
Article
top
Influence of the consolidating pressure of thermoplastic
prepregs on the mode I critical energy release rate
C. Avril, B. Reck, D. Perreux, F. Thiebaud
View Full
Article
|