|
A
Abd El-Salam Azab N.
Effect of process parameters on the grinding of polymeric composites
View Full Article top
Abdizadeh H.
Hardness and tensile strength study on Al356
alloy matrix-nano Al2O3 particle
reiforced composite
View Full Article top
Aboura Z.
Contribution of damage mechanisms
comprehension of interlock-reinforced composite materials.
View Full Article top
Acha B.A.
Evaluation of environmental effects on
polymer matrix composites by micromechanical and
macromechanical tests
View Full Article top
Ackeren van J.
Impact resistance of load bearing sandwich
elements with textile reinforced concrete faces
View Full Article top
Adanur S.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Adden S.
Description and modelling of the multi-axial
stiffness degradation in fatigue loaded ncfs under sequence
loading
View Full Article top
Adekunle K.
Synthesis of reactive soybean oils for the
use as biobased thermoset resins for structural natural
fibre composites
View Full Article top
Adhikari D.
Bio-composites from canola oil based resin
and hemp and flax fibers
View Full Article top
Adhikary K.B.
Durability of wood
flour-recycled thermoplastics composites under accelerated
freeze-thaw cycles
View Full Article top
Aduriz X.A.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Aggogeri F.
Application of composite materials for
lightweight and smart structures design of high performance
milling machines
View Full Article top
Aghazadeh J.
The influence of aspect ratio of reinforcing
fibers on mechanical properties of gypsum matrix composite
panels
View Full Article top
Ahmad I.
Carbon nanotubes-reinforcing mgo-doped Al2O3
nanocomposites
View Full Article top
Akkerman R.
Dynamic analysis of degradation in e-glass
reinforced epoxy composite
View Full Article top
Akermo M.
On the interply friction of different generations of unidirectional
prepreg materials
View Full Article top
Akesson D.
Synthesis of reactive soybean oils for the use as biobased thermoset
resins for structural natural fibre composites
View Full Article top
Alcock B.
Fatigue properties of highly oriented
polypropylene tapes and all-polypropylene composites
View Full Article top
Allen D.H.
A model for predicting multiscale crack
growth due.
View Full Article top
Almada-Lobo B.
Use of composite materials in public service
vehicles
View Full Article top
Almgren K.M.
An automated image analysis method for
measuring fibre contact in fibrous and composite materials
View Full Article
Hygroexpansion of wood-fibre composite
materials: effects of cell-wall cross-linking and
composition of thermoplastic matrix
View Full Article top
Alobaidani A.D.
Enhancement of the side emission efficiency
of commercial pmma optical fibres in the uv-a and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
Al-Salloum Y.A.
Behavior of full-scale shear deficient
corner RC beam-column connections retrofitted with CFRP
sheets
View Full Article top
Alzina A.
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Anastasios V.
Modelling fatigue life of composite
laminates with anfis
View Full Article top
Andersen P.
Hydroelastic tailoring and optimization of a
composite marine propeller
View Full Article top
André A.
Design methods for composite reinforced
metallic beams
View Full Article top
Aniskevich A.
Modelling of effective elastic properties of
composite containing nanoparticles with an inhomogeneous
interphase
View Full Article top
Antonova A.V.
Ni3al-mo multilayer composites: manufacture,
structure, properties
View Full Article top
Antonsen G.A.
Mechanical properties of CFRP-laminates with
the dependency of size/resin compatibility and processing
parameters
View Full Article top
Aranguren M.I.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Arao Y.
Dimensional and geometrical stability of
CFRP laminates in hostile environment
View Full Article top
Araújo F.
Structural health-monitoring of gfrp
structures using embedded fibre bragg gratings
View Full Article top
Arnestad G.
A high-speed craft with composite hull
View Full Article top
Arnold E.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article
Development of high performance furan-based
bio-composites for vehicle panels
View Full Article top
Arrelli M.
Delamination growth and fibre/matrix
progresive damage in composite plates under compression
View Full Article top
Asareh M.
Investigation of preform manufacturing
techniques using novel binder coated carbon fibre tows
View Full Article top
Ashcroft I.A.
Matrix cracking and delamination in
cross-ply laminates: effect of randomness
View Full Article top
Asp L.
Effects of CFRP laminate thickness on the
bending after impact strength
View Full Article
Two-phase continuum modelling of composites
consolidation
View Full Article top
Auad M.L.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Aubagnac C.
Design of a bonded anchorage for composite
plates: influence of the adhesive plasticity
View Full Article top
Auinger T.
High impact modification of PLA with natural
rubber and the influence of fiber content, fiber length on
the impact strength of pla-flax-natural rubber composites
View Full Article top
Aurich J.C.
Study of the grindability of powder
metallurgically produced aluminum metal matrix composite (Al
- MMC)
View Full Article top
Avella M.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Avril C.
Influence of the consolidating pressure of
thermoplastic prepregs on the mode i critical energy release
rate
View Full Article top
Ayadi Z.
Study of the displacement field on the edge
of cracked laminated composites
View Full Article top
B
Baaran J.
A semi-analytical methodology for the
residual strength prediction of damaged sandwich structures
View Full Article top
Baere de I.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article
A modified three-rail shear test for fatigue
of composite laminates
View Full Article
A clamped three-point bending setup for
fatigue of thin composite laminates
View Full Article top
Baharvandi H.R.
Hardness and tensile strength study on
Al356 alloy matrix-nano Al203 particle reiforced composite
View Full Article top
Bailey P.B.S.
Chemical monitoring of composite matrices by
evanescent wave spectroscopy
View Full Article top
Bailleul J.L.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Baisch P.
On the multi-scale modelling of the
manufacturing of a thick walled composite panel- theoretical
and experimental study
View Full Article top
Bak H.D.
Manufacture of CNT reinforced polymer
composites using nanofibers containing CNT
View Full Article top
Bakis C.E.
Numerical estimates of composite sandwich
response to quasi static impact
View Full Article top
Baldi F.
Epoxy/layered-silicate nanocomposites:
effect of the matrix composition on large deformation and
fracture behaviour
View Full Article top
Baley C.
Statistical behaviour of hemp and sisal
fiber reinforced polypropylene composites
View Full Article
Study of the tensile properties of stinging
nettle fibres (urtica dioica) for polymer reinforcement:
study of single fibre tensile properties
View Full Article
How the morphology of a flax fibre
influences its mechanical behaviour
View Full Article
Seawater ageing of low styrene emission resins
for marine composites: mechanical behaviour and nano-indentation studies
View Full Article top
Baltopoulos A.
Nano-enhanced impact properties of carbon
fibre reinforced composites
View Full Article top
Baranger E.
Toward a virtual material for lifetime
prediction of CMCs
View Full Article
Identification and validation of a
multi-physic macro model for the lifetime prediction of
self-healing ceramic matrix composites
View Full Article top
Bárány T.
Impact resistance of all-polypropylene
composites composed of alpha and beta modifications
View Full Article top
Barbierie E.
Delamination modelling using an element free
galerkin approach
View Full Article top
Barkoula N.M.
Fatigue properties of highly oriented
polypropylene tapes and all-polypropylene composites
View Full Article top
Barrau J.J.
Experimental analysis and
modeling of z-pinned joints under pull-out loading
View Full Article
Modelling of impact damage in laminated
composites
View Full Article top
Barrena M.I.
Manufacture methods comparison and
characterization of conductive glass reinforced plastics by
adding carbon nanofibres
View Full Article top
Barroso A.
Failure of adhesively bonded joints.
analysis of experimental results by analysis of experimental
results by nominal and local approache
View Full Article top
Bartelt H.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Barthelemy H.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Barton D.C.
Understanding the links between structure
and properties in die drawing wood powder polymer composites
View Full Article top
Barvosa-Carter W.
Three-dimensional open-cellular materials
formed from self-propagating polymer waveguides
View Full Article top
Beard M.
Novel dental cements containing combinations
of cyanoacrylate resin, hydroxyapatite, and new
aluminium-based fillers
View Full Article top
Behaeghe A.
Impact and post-impact properties of carbon
fibre non-crimp fabric composites
View Full Article top
Behzadi S.
Multiscale modelling of fibre reinforced
composites
View Full Article top
Belec L.
Multiscale interphase investigation of sized glass fibre/thermoset
composite
View Full Article top
Belkassem B.
Impact resistance of load bearing sandwich
elements with textile reinforced concrete faces
View Full Article top
Ben G.
Impact behavior and optimum design of CFRP/Al hybridbeam in side collision of automobiles
View Full Article top
Bennett J.A.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article top
Benson T.
Enhancement of the side emission efficiency
of commercial PMMA optical fibres in the UV-A and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
Benzeggagh M.L.
Contribution of damage mechanisms
comprehension of interlock-reinforced composite materials.
View Full Article top
Berggreen C.
Fatigue debond growth in sandwich structures
loaded in mixed mode bending (MMB)
View Full Article
Hydroelastic tailoring and optimization of a
composite marine propeller
View Full Article top
Berglund L.
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Berglund L.A.
The transverse off-axis stiffness and
strength of softwood
View Full Article top
Berglund P.
Viscosity of chitosan/montmorillonite
mixtures for coatings for paperboard packages
View Full Article top
Bernardo C.A.
New thermoplastic matrix composites for
demanding applications
View Full Article top
Berthold F.
Hierarchical design as a tool in development
of wood-based composite applications
View Full Article
Hygroexpansion of wood-fibre composite
materials: effects of cell-wall cross-linking and
composition of thermoplastic matrix
View Full Article top
Bhatnagar N.
Machining of UD- CFRP composites:
experiments and finite element modeling
View Full Article
Fiber orientation at the mid-plane in
injection molding of reinforced thermoplastics
View Full Article top
Bignotti F.
Epoxy/layered-silicate nanocomposites:
effect of the matrix composition on large deformation and
fracture behaviour
View Full Article top
Birman V.
Strength and stiffness of fiber-reinforced,
particulate-matrix composites
View Full Article top
Bismarck A.
Hierarchical composites with carbon nanotube
grafted fibres
View Full Article top
Blanco N.
Design and analysis of a compact tension
(CT) specimen for intralaminar fracture toughness
characterisation of woven composite laminates
View Full Article top
Blasques
Hydroelastic tailoring and optimization of a
composite marine propeller
View Full Article top
Bledzki A.K.
Characterization of grain byproducts and
properties of its biodegrade composites
View Full Article top
Blom J.
Determination of material parameters of a
textile reinforced composite using an inverse method
View Full Article top
Blommaert C.
Design of composite
material for cost effective large scale production of
components for floating offshore structures
View Full Article top
Bodros E.
Study of the tensile properties of stinging
nettle fibres (urtica dioica) for polymer reinforcement:
study of single fibre tensile properties
View Full Article top
Bogdanovich A.E.
Predictive analyses and experimental
validations of effective elastic properties of 2D and 3D woven composites
View Full Article top
Bogoeva-Gaceva G.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Bohm H.J.
Assessment of mixed uniform boundary
conditions for predicting the macroscopic mechanical
behavior of composite materials
View Full Article top
Boisrobert C.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Boisse P.
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article top
Bond I.P.
Bioinspired and biomimetic self-healing of
advanced composite materials
View Full Article
Self-healing composite sandwich panels
View Full Article top
Bonner M.J.
The incorporation of carbon nano fibres to
enhance the properties of hot compacted self-reinforces
single polymer composites
View Full Article
Understanding the links between structure
and properties in die drawing wood powder polymer composites
View Full Article
Developing the next generation of
self-reinforced polymer composites
View Full Article top
Botsis J.
Characterisation of bridging tractions in mode-I
delamination using distributed strain measurements and
numerical modeling
View Full Article top
Boulay J.L.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Bourban P.E.
Micromechanics of composites with integrated
shear thickening fluids
View Full Article top
Bourmaud A.
Seawater ageing of low styrene emission resins
for marine composites: mechanical behaviour and nano-indentation studies
View Full Article top
Boussu F.
Geometrical modelling of 3D textile
composite application to warp interlock carbon fabrics
View Full Article top
Bouvet C.
Modelling of impact damage in laminated
composites
View Full Article top
Boyard N.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
View Full Article top
Bréard J.
How the morphology of a flax fibre
influences its mechanical behaviour
View Full Article top
Bredberg A.
Effects of CFRP laminate thickness on the
bending after impact strength
View Full Article top
Brodowsky H M.
Cyclic loading of the interphase in single
fibre model composites
View Full Article top
Brookbank P.
Novel dental cements containing combinations
of cyanoacrylate resin, hydroxyapatite, and new
aluminium-based fillers
View Full Article top
Brooks R.
Numerical modelling of the behavior of
thermoplastic coomposite sandwich structures under localised
impact loading
View Full Article top
Brown K.A.
Numerical modelling of the behavior of
thermoplastic coomposite sandwich structures under localised
impact loading
View Full Article top
Brøndsted P.l.
Fiber bridging in gfrp composites:
mesomechanical analysis
View Full Article top
Buffière J.Y.
Very high resolution computed tomography of
damage in laminated composites
View Full Article top
Burmistrov V.I.
Ni3Al-Mo multilayer composites: manufacture,
structure, properties
View Full Article top
Buschhorn S.T.
Functional properties of nanocomposite epoxy
matrix systems for strain-sensing applications
View Full Article top
Butler R.
A static compressive strength model for
damaged composite laminates
View Full Article top
Butragueño A.
Out of autoclave curing of thermoset
materials
View Full Article top
Butz B.
Damage evolution and anisotropy in freeze
cast metal/ceramic composites: an in-situ SEM analysis
View Full Article top
Buzarovska A.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Büter A.
Contribution to the mechanical-mathematical
analysis of fibre composite stringer stiffened panels
View Full Article top
Böger L.
Damage sensing with nanocomposite/glass-fibre
hybrid composites via electrical conductivity methods
View Full Article
Functional properties of nanocomposite epoxy
matrix systems for strain-sensing applications
View Full Article top
Böhm R.
Numerical and experimental deformation and
failure analysis of 3D-textile reinforced lightweight
structures under impact loads
View Full Article top
C
Cabrera N.O.
Fatigue properties of highly oriented
polypropylene tapes and all-polypropylene composites
View Full Article top
Camanho P.P.
Simulation of progressive damage in bolted
composite joints
View Full Article
A pressure-dependent constitutive model
with failure for laminated composites
View Full Article
Hybrid composite laminates for high-performance bolted joints
View Full Article top
Campilho R.D.S.G.
Cohesive mixed-mode damage model applied to
the simulation of the mechanical behaviour of a repaired
sandwich beams
View Full Article top
Cañavate J.
Composites from ground tyre rubber. effect
of surface modification by wetting additives
View Full Article top
Caneva C.
Characterization of indentation damage on
carbon/epoxy laminates by means of acoustic emission
View Full Article top
Cao H.
Carbon nanotubes-reinforcing mgo-doped Al2O3
nanocomposites
View Full Article top
Capell T.F.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Caprino G.
Composite materials characterization by
acoustic emission technique
View Full Article top
Carlsson L.A.
Evaluation of environmental effects on
polymer matrix composites by micromechanical and
macromechanical tests
View Full Article
Fracture mechanics analysis of single fiber
fragmentation test
View Full Article
Fatigue debond growth in sandwich structures
loaded in mixed mode bending (MMB)
View Full Article top
Caron J.F.
Design of a bonded anchorage for composite
plates: influence of the adhesive plasticity
View Full Article top
Carrère N.
A macroscopic visco-elastic-damage model for
three dimensional woven fabric composites
View Full Article top
Carrillo F.
Composites from ground tyre rubber. effect
of surface modification by wetting additives
View Full Article top
Carruthers J.J.
The application of
particle swarm optimisation to sandwich material design
View Full Article
Design and analysis of a composite energy
absorbing railcab nosecone
View Full Article top
Cartié D.D.R.
Investigation of preform manufacturing
techniques using novel binder coated carbon fibre tows
View Full Article top
Carvalho de O.
Mechanical characterization of polymerics
composites winding in diverse reinforced orientation of the
reinforcement
View Full Article top
Carvelli V.
On the mechanical behaviour of monofilament
technical textiles
View Full Article top
Casas P.
Composites from ground tyre rubber. effect
of surface modification by wetting additives
View Full Article top
Case S.
Development of a multifunctional composite
fuel cell
View Full Article top
Castanié B.
Modelling of impact damage in laminated
composites
View Full Article top
Catenaro R.
Alfa Romeo "8c Competizione" all composite
body and interiors
View Full Article top
Cénac F.
Abrasive-water-jet machining of polymer
composite materials
View Full Article top
Cesare di L.
Alfa Romeo "8c Competizione" all composite
body and interiors
View Full Article top
Chailan J.F.
Multiscale interphase investigation of sized glass fibre/thermoset
composite
View Full Article top
Chamis C.
Probabilistic methods for structural
reliability and risk
View Full Article top
Chang R-C
Synthesis, characterization, and thermal
properties of bridged polysilsesquioxanes -molecular
nanocomposites
View Full Article top
Chapelle D.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Charlet K.
How the morphology of a flax fibre
influences its mechanical behaviour
View Full Article top
Chataigner S.
Design of a bonded anchorage for composite
plates: influence of the adhesive plasticity
View Full Article top
Chatys R.
Free radial vibrations in three-layer
spherical sandwich shell
View Full Article top
Chen H.
Carbon nanotubes-reinforcing mgo-doped al2o3
nanocomposites
View Full Article top
Chen X.
Design, manufacture, and analysis of 3d
honeycomb textile composites
View Full Article top
Cheremnykh S. I.
Prediction of deformation and biaxial
strength of fibre reinforced laminates for wwfe by using
micromechanics
View Full Article top
Cherif C.
Manufacturing method for symmetric laminates
from improved stitch bonded multi-plies
View Full Article top
Cheype C.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Chi T.T.
Meso scale analysis of damage and stiffness
degradation in ncf composites
View Full Article top
Chiang C-L.
Synthesis, characterization, and thermal
properties of bridged polysilsesquioxanes -molecular
nanocomposites
View Full Article top
Clarke A.B.
Design allowables: considering the tensile
and compressive behaviour of notched and unnotched CFRP
View Full Article top
Cluzel C.
Identification and validation of a
multi-physic macro model for the lifetime prediction of
self-healing ceramic matrix composites
View Full Article top
Cognard J.Y.
Definition of a simple test to characterize
the non-linear shear behaviour of the adhesive in an
assembly
View Full Article top
Colin C.
Behaviours of SiC fibres and SiC cvi matrix
View Full Article
Numerical homogenization of the elastic
behaviour of SiC/SiC composites at the scale of the tow:
representative volume element, effective behaviour and
stress concentrations
View Full Article top
Collombet F.
Through-the-thickness material properties
identification using 3D-DIC and FBG measurements
View Full Article
Abrasive-water-jet machining of polymer
composite materials
View Full Article
Influence of manufacturing on the critical
machining parameters during drilling
View Full Article top
Colom X.
Composites from ground tyre rubber. effect
of surface modification by wetting additives
View Full Article top
Comond O.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Corre le S.
Ultrasonic welding of thermoplastic
composites, modeling of the process
View Full Article top
Correa E.
Effect of curing stresses on the inter-fibre
failure under transverse compression
View Full Article top
Correia N.
Use of composite materials in public service
vehicles
View Full Article top
Craven R.
Micromechanical finite element study of
impact damaged fractured fibres under compression
View Full Article top
Créac'hcadec R.
Definition of a simple test to characterize
the non-linear shear behaviour of the adhesive in an
assembly
View Full Article top
Creemers R.
Development of an analysis tool for the
design of bonded composite repairs
View Full Article top
Cremona A.
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Crocker L.
Intralaminar fatigue crack initiation and
growth in off-axis plies of composite laminates
View Full Article top
Crocombe A.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Crookston J.
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article top
Cugnoni J.
Characterisation of bridging tractions in mode-I
delamination using distributed strain measurements and
numerical modeling
View Full Article top
Curtis P.T.
Multiscale modelling of fibre reinforced
composites
View Full Article
Physical mechanisms associated with
initiation and propagation of kink-bands
View Full Article top
Cuypers H.
Impact resistance of load bearing sandwich
elements with textile reinforced concrete faces
View Full Article
Determination of material parameters of a
textile reinforced composite using an inverse method
View Full Article top
Czarnota C.
Experimental identification of fatigue
damage model for short glass fibre reinforced thermoplastic
composites
View Full Article top
Czumanski T.
Manufacturing process adaptation for the
cost/weight optimization of aircraft structures
View Full Article top s
D
Danilov V.D.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Daoud A.
Microstructure and tensile properties of
extruded 7475 Al-Al2O3 particle
composites
View Full Article top
Dau F.
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Davies P.
Definition of a simple test to characterize
the non-linear shear behaviour of the adhesive in an
assembly
View Full Article top
Davies P.
Seawater ageing of low styrene emission resins
for marine composites: mechanical behaviour and nano-indentation studies
View Full Article top
Davies R.J.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article top
Day R.
Structure and properties of laminates
manufactured using the quickstep technique
View Full Article top
Deffor H.
Design and fabrication of vartm fabricated
skin panels with integrated hollow hat stiffeners
View Full Article top
Degrieck J.
A modified three-rail shear test for fatigue
of composite laminates
View Full Article
A clamped three-point bending setup for
fatigue of thin composite laminates
View Full Article
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Degtiareva O.I.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Delaunay D.
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
View Full Article
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Déléris M.
Abrasive-water-jet machining of polymer
composite materials
View Full Article top
Delfia la G.
Integrity of composite aircraft fuselage
materials under crash fire conditions
View Full Article top
Delobelle P.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Demont P.
Processing using reactive amphiphilic
molecules, characterization and properties of double-walled
carbon nanotubes filled epoxy nanocomposites
View Full Article top
Didierjean S.
Experimental analysis and
modeling of z-pinned joints under pull-out loading
View Full Article top
Dikobe D.G.
Thermal and mechanical properties of
PP/EVA/WP and MAPP/EVA/PP polymer blend composites
View Full Article top
Dobes F.
Back stresses in creep of 2024Al-saffil fibre composite
View Full Article
Creep of Ax41 magnesium alloy matrix composites with alumina and carbon
short fibers
View Full Article top
Domínguez Á
Out of autoclave curing of thermoset
materials
View Full Article top
Dorofeev A.A.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Douin J.
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
View Full Article top
Dumont P.
Conduction in composites with highly
conductive short fibres: comparison between experiments,
discrete element simulation and analytical solution
View Full Article top
Dumont P.J.J.
Modelling and simulation of the rheology of
bulk moulding compounds (BMC) during mould filling
View Full Article top
E
Eberhardt A.
Investigation of the interfacial debonding
in a shape memory alloy (NiTi) fibre reinforced epoxy matrix
composite
View Full Article top
Eckers V.
Modelling the seam architectures for textile
performing
View Full Article top
Egizabal P.
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
View Full Article top
Eichhorn S.J.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article
Polymer composite nanofibres
View Full Article
Nanotube composite coatings as strain
sensors on glass fibres in epoxy composites
View Full Article
Deformation micromechanics of glass fibre
based and hybrid cellulose-glass fibre composites
View Full Article top
Eitzenberger J.
Debond crack growth in fatigue along fiber
in UD composite with broken fibers
View Full Article top
Elahi H.
The influence of aspect ratio of reinforcing
fibers on mechanical properties of gypsum matrix composite
panels
View Full Article top
Elsawi I.
Processing using reactive amphiphilic
molecules, characterization and properties of double-walled
carbon nanotubes filled epoxy nanocomposites
View Full Article top
Embery J.E.
A study of the rheology, processing and flow
induced mesostructures of glass bead filled polystyrene
View Full Article top
Endruweit A.
The permeability of random discontinuous
carbon fibre preforms
View Full Article
Enhancement of the side emission efficiency
of commercial PMMA optical fibres in the UV-A and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
Erkel van A.G.
Modelling sandwich
failure under blast loads
View Full Article top
Errico M. E.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Evans K.E.
Novel dental cements containing combinations
of cyanoacrylate resin, hydroxyapatite, and new
aluminium-based fillers
View Full Article
Recyclate fibres -matrix interface analysis
for reuse in sheet mould compounds (SMC)
View Full Article top
Evsyukov S.E.
Bismaleimide composites: unusual processing
techniques
View Full Article top
F
Faber K.T.
Mechanical behavior of interpenetrating al-sic composites
derived from wood templates
View Full Article top
Fagerberg L.
Reasonable knockdown factors for sandwich
face sheet wrinkling
View Full Article top
Fahimian M.
Bio-composites from canola oil based resin
and hemp and flax fibers
View Full Article top
Fallah A.S.
Numerical study of the effect of a
core-adjacent layer of polyurea on the blast energy
absorption of a sandwich T-joint
View Full Article top
Falzon B. G.
Micromechanical finite element study of
impact damaged fractured fibres under compression
View Full Article top
Farge L.
Study of the displacement field on the edge
of cracked laminated composites
View Full Article top
Favier D.
Conduction in composites with highly
conductive short fibres: comparison between experiments,
discrete element simulation and analytical solution
View Full Article
Modelling and simulation of the rheology of
bulk moulding compounds (BMC) during mould filling
View Full Article top
Feldhusen J.
Fast joining and repairing of sandwich
materials with detachable mechanical connection technology
View Full Article top
Fernandes A.A.
Use of composite materials in public service
vehicles
View Full Article
Structural health-monitoring of gfrp
structures using embedded fibre Bragg gratings
View Full Article top
Fernberg P.
Damage detection in carbon fibre cross-ply
laminates by aid of carbon nanotube doped resin
View Full Article
"Detect" - a new defect detection method and
its use on sheet moulding compound (SMC) substrates
View Full Article top
Fernlund G.
Reduction of risk and uncertainty in
composites processing using process modelling and Bayesian
statistics
View Full Article top
Ferreira A.
Structural health-monitoring of gfrp
structures using embedded fibre Bragg gratings
View Full Article
Use of composite materials in public service
vehicles
View Full Article top
Ferreira A.J.M
Analysis of cylindrical sandwich shells
using a mesless method and an optimization thecnique
View Full Article top
Ferrer M.
High-power diode laser welding of highly
reinforced Al-SiC composites
View Full Article top
Fideu P.
On the multi-scale modelling of the
manufacturing of a thick walled composite panel- theoretical
and experimental study
View Full Article top
Figovsky O.
Massive composite material on the basis of
iron
View Full Article top
Fink A.
Hybrid composite laminates for
high-performance bolted joints
View Full Article top
Fischer C.
Micromechanics of composites with integrated
shear thickening fluids
View Full Article top
Fishpool D.T.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article top
Fleck N.
Simulated properties of hollow pyramidal
lattice truss structures
View Full Article top
Fogelström L.
Combining hardness and flexibility in
coatings based on nanoparticle-filled hyperbranched polymers
View Full Article
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Foreman J. P.
Multiscale modelling of fibre reinforced
composites
View Full Article top
Forstner R.
High impact modification of PLA with natural
rubber and the influence of fiber content, fiber length on
the impact strength of pla-flax-natural rubber composites
View Full Article top
Foster R.J.
The incorporation of carbon nano fibres to
enhance the properties of hot compacted self-reinforces
single polymer composites
View Full Article top
Fowler D.W.
Performance monitoring of reinforced
concrete wrapped with FRPS
View Full Article top
Frąckowiak S.
Influence of fibers modification on
biocomposite properties
View Full Article top
Franke R.
Development and characterization of ptfe
nanopowder-elastomeric composites for tribological
allpications
View Full Article top
Frostig Y.
Free vibrations of sandwich panels with a transversely
flexible core and temperature dependent core properties
View Full Article top
Furniss D.
Enhancement of the side emission efficiency
of commercial PMMA optical fibres in the UV-A and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
G
Gamstedt E.K.
Hierarchical design as a tool in development
of wood-based composite applications
View Full Article
Hygroexpansion of wood-fibre composite
materials: effects of cell-wall cross-linking and
composition of thermoplastic matrix
View Full Article
An automated image analysis method for
measuring fibre contact in fibrous and composite materials
View Full Article top
García de Cortazar M.
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
View Full Article top
Gehrig F.
Influence of voids on the degradation of
CFRP under fatigue loading
View Full Article top
Gehrmann J.
Functional properties of nanocomposite epoxy
matrix systems for strain-sensing applications
View Full Article top
Gélébart L.
Behaviours of SiC fibres and SiC cvi matrix
View Full Article top
Genet M.
Toward a virtual material for lifetime
prediction of CMCs
View Full Article top
Geng Y.
Surfactant modified cnt/epoxy nanocomposites
for improved mechanical and functional properties
View Full Article top
Gentile G.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Ghassemieh E.
Ultrasonic consolidation as novel
manufacturing technique in embedding passive/active fibres
in metal matrices
View Full Article
Bio-degradable sintered composites of pla
and ha in scaffolds
View Full Article top
Ghiasi M.
Simultaneous structural and manufacturing
optimization of composite parts using normal constraint
method
View Full Article top
Ghita O.R.
Recyclate fibres -matrix interface analysis
for reuse in sheet mould compounds (SMC)
View Full Article
Novel dental cements containing combinations
of cyanoacrylate resin, hydroxyapatite, and new
aluminium-based fillers
View Full Article top
Giannakas A.
Preparation and characterization of
exfoliated ldpe/organolaponite nanocomposites
View Full Article top
Giannis S.
Development of high performance furan-based
bio-composites for vehicle panels
View Full Article top
Gibson A.G.
Viscoelastic behaviour of composite
laminates from quantitative DMTA
View Full Article
Integrity of composite aircraft fuselage
materials under crash fire conditions
View Full Article
Phenolic and polyester pultrusions underload
in fire: development of a failure model
View Full Article top
Gielen A.W.J.
Modelling sandwich
failure under blast loads
View Full Article top
Gillespie Jr J.W.
Design and fabrication of vartm fabricated
skin panels with integrated hollow hat stiffeners
View Full Article top
Glaskova Т.
Modelling of effective elastic properties of
composite containing nanoparticles with an inhomogeneous
interphase
View Full Article top
Gmür Th.
Characterisation of bridging tractions in mode-I
delamination using distributed strain measurements and
numerical modeling
View Full Article top
Goda K.
Effect of yarn twist on Young's modulus of
fully-green composites reinforced with ramie woven fabrics
View Full Article
Effect of stress ratio on the fatigue crack
growth behaviour of C/C composites
View Full Article top
Gomina M.
How the morphology of a flax fibre
influences its mechanical behaviour
View Full Article top
Gong X.
Design, manufacture, and analysis of 3d
honeycomb textile composites
View Full Article top
González C.
Failure criteria for composite materials
under multiaxial stress states
View Full Article top
Gower M.R.L.
Assessment of the applicability of
compression-after-after-impact
(CAI) and open-hole tension (OHT) methods for use under
fatigue loading
View Full Article top
Grandidier J.C.
Coupled mechanical-chemical simulation of an
oxidized CFRP composite
View Full Article top
Green B. G.
Scaling effects in notched composites
View Full Article top
Greenhalgh E.S.
Hierarchical composites with carbon nanotube
grafted fibres
View Full Article
Fractography
of polymer composites: current status and future issues
View Full Article top
Gresil M.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Gries T.
Modelling the seam architectures for textile
performing
View Full Article top
Groves A.
Numerical study of the effect of a
core-adjacent layer of polyurea on the blast energy
absorption of a sandwich T-joint
View Full Article top
Grozdanov A.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Grüber B.
Analytical methods for the stress
concentration analysis of multilayered anisotropic
composites with pin-loaded holes
View Full Article top
Gude M.
Numerical and experimental deformation and
failure analysis of 3D-textile reinforced lightweight
structures under impact loads
View Full Article top
Gude M.R.
Carbon nanofibers reinforced adhesives for
joining carbon fiber epoxy composites
View Full Article top
Guduri B.R
Kenaf Fibre as Reinforcement in
Aliphatic-Aromatic Co-polyester Bio-composites
View Full Article top
Guedes R.M.
Lifetime prediction of polymer-matrix
composite structures for civil engineering applications
View Full Article top
Guida M.
Evaluation and validation of multi-physics
fe methods to simulate bird strike on a wing leading edge
View Full Article top
Guidon E.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article top
Guillaumat L.
Statistical behaviour of hemp and sisal
fiber reinforced polypropylene composites
View Full Article
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Guillon D.
Initiation and propagation mechanisms of
progressive crushing in carbon-epoxy laminated plates
View Full Article top
Guiraud O.
Modelling and simulation of the rheology of
bulk moulding compounds (BMC) during mould filling
View Full Article top
Gutkin R.
Physical mechanisms associated with
initiation and propagation of kink-bands
View Full Article top
Gutwinski M.
Experimental and Theoretical Investigation
of Thermal Stress in CFRP-Foam-Sandwich Structures
View Full Article top
Gällstedt M.
Viscosity of chitosan/montmorillonite
mixtures for coatings for paperboard packages
View Full Article top
H
Haller P.
Thermo - hydromechanical compression of fast
growing poplar from short term plantation
View Full Article top
Hallett S.R.
Modelling mode i crack initiation in
composites under fatigue loading using interface elements
View Full Article
Scaling effects in notched composites
View Full Article top
Hamada K.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article top
Hamdi S.
Dynamic analysis of degradation in e-glass
reinforced epoxy composite
View Full Article top
Han S.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article top
Hand R J.
Chemical monitoring of composite matrices by
evanescent wave spectroscopy
View Full Article top
Harper L.T.
The permeability of random discontinuous
carbon fibre preforms
View Full Article top
Hatta H.
Fracture behavior of CFRP laminate under
artificial lightning strike
View Full Article
The role of a polymer-derived matrix on the
tensile performance of SiC/SiC composite
View Full Article
Effect of the fiber/matrix interface on the
in situ fiber performance of PIP-SiC/SiC composite
View Full Article
Efficient heat energy management of
aerospace structures via heat-directed composite materials
View Full Article top
Hausding J.
Manufacturing method for symmetric laminates
from improved stitch bonded multi-plies
View Full Article top
Hayes S.A.
Chemical monitoring of composite matrices by
evanescent wave spectroscopy
View Full Article top
Hedlund-Åström A.
A high-speed craft with composite hull
View Full Article top
Heider D.
Design and fabrication of vartm fabricated
skin panels with integrated hollow hat stiffeners
View Full Article top
Heim C.
On the multi-scale modelling of the
manufacturing of a thick walled composite panel- theoretical
and experimental study
View Full Article top
Heinrich G.
Development and characterization of ptfe
nanopowder-elastomeric composites for tribological
allpications
View Full Article top
Hejda M.
Deformation micromechanics of glass fibre
based and hybrid cellulose-glass fibre composites
View Full Article
Nanotube composite coatings as strain
sensors on glass fibres in epoxy composites
View Full Article top
Hellbratt S.E.
Time for light weight composite materials to
enter the merchant shipbuilding
View Full Article top
Heman B.
Multiscale interphase investigation of sized glass fibre/thermoset
composite
View Full Article top
Hemelrijck van D.
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
Strain distribution in a biaxially loaded
curciform composite specimen
View Full Article
Biaxial mechanical fatigue using cruciform
composite specimens
View Full Article top
Henkel F.
Modelling the seam architectures for textile
performing
View Full Article top
Henzel M.
The effect of tension-tension fatigue and
lay-up configuration on damage accumulation in carbon/epoxy
composites
View Full Article top
Herrmann A.
On the multi-scale modelling of the
manufacturing of a thick walled composite panel- theoretical
and experimental study
View Full Article top
Hildebrand M.
Cost efficient composite design methods
View Full Article top
Hiley M. J.
Fractography
of polymer composites: current status and future issues
View Full Article top
Hilton C.
Development of a multifunctional composite
fuel cell
View Full Article top
Hine P.J.
Understanding the links between structure
and properties in die drawing wood powder polymer composites
View Full Article
Developing the next generation of
self-reinforced polymer composites
View Full Article
A study of the rheology, processing and flow
induced mesostructures of glass bead filled polystyrene
View Full Article
The incorporation of carbon nano fibres to
enhance the properties of hot compacted self-reinforces
single polymer composites
View Full Article top
Hintze C.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
Hirano Y.
Fracture behavior of CFRP laminate under
artificial lightning strike
View Full Article top
Hjortberg M.
A high-speed craft with composite hull
View Full Article top
Hochard C.
A generalized damage model for woven ply
laminates under static and fatigue loads
View Full Article
A ply scale non local approach to describe
the failure of laminated structure
View Full Article top
Hof vn C.
Modelling sandwich
failure under blast loads
View Full Article top
Hojo M.
Evaluation of anisotropic deformation and
fracture properties in extruded HAp/PLLA composites
View Full Article top
Holmberg J.A.
Micromechanical vs lamina based failure
theories
View Full Article top
Honda S.
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article top
Hornig A.
Numerical and experimental deformation and
failure analysis of 3D-textile reinforced lightweight
structures under impact loads
View Full Article top
Horst P.
Description and modelling of the multi-axial
stiffness degradation in fatigue loaded ncfs under sequence
loading
View Full Article top
Hoydonckx H.E.
Development of high performance furan-based
bio-composites for vehicle panels
View Full Article top
Huang C.
Formable sandwich cores with non-conventional cell shapes
View Full Article
Acoustics of sandwich structures - an
overview
View Full Article top
Hudson C.W.
The application of
particle swarm optimisation to sandwich material design
View Full Article top
Hufenbach W.
Analytical methods for the stress
concentration analysis of multilayered anisotropic
composites with pin-loaded holes
View Full Article
Numerical and experimental deformation and
failure analysis of 3D-textile reinforced lightweight
structures under impact loads
View Full Article top
Hult A.
Combining hardness and flexibility in
coatings based on nanoparticle-filled hyperbranched polymers
View Full Article
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Humbert L.
Characterisation of bridging tractions in mode-I
delamination using distributed strain measurements and
numerical modeling
View Full Article top
Hyon S.H.
Environmental degradation of
stereocomplex-type polylactic acid fiber
View Full Article
Evaluation of anisotropic deformation and
fracture properties in extruded HAp/PLLA composites
View Full Article top
Hård af Segerstad P.
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Hörberg E.
A simplified method for predictions of shape
distortions
View Full Article top
I
Iguchi Y. Y.
Design method of API high pressure FRP pipe
View Full Article top
Imafuku Y.
Direct measurement on fracture toughness of
carbon fibre
View Full Article top
Ingleton S.
Design and analysis of a composite energy
absorbing railcab nosecone
View Full Article top
Iorio de I.
Composite materials characterization by
acoustic emission technique
View Full Article top
Iqbal M.
Application of polymeric nano composites at
low earth orbit and geosynchronous earth orbit
View Full Article top
Irisarri F-X.
Progressive damage and
strength of bolted joints in composite structures
View Full Article top
Isomäki N.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
Itterbeeck van P.
Determination of material parameters of a
textile reinforced composite using an inverse method
View Full Article top
Iwahori Y.
Fracture behavior of CFRP laminate under
artificial lightning strike
View Full Article top
Iwanczuk A.
Influence of fibers modification on
biocomposite properties
View Full Article top
Ivanov D.
Predictive analyses and experimental
validations of effective elastic properties of2D and 3D
woven composites
View Full Article top
Ivanov D.S.
Meso scale analysis of damage and stiffness
degradation in ncf composites
View Full Article
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article top
Iwatani T.
Design method of API high pressure FRP pipe
View Full Article
Manufacturing know-how using self-condensing
binder for glass fiber mat
View Full Article top
J
Jacobs E.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Jacobsen A.J.
Three-dimensional open-cellular materials
formed from self-propagating polymer waveguides
View Full Article top
Jacquesson M.
Characterisation of a composite material:
needs and methodologies
View Full Article top
Jansson N.E.
Testing and analysis of a highly loaded
composite flange
View Full Article top
Jansson T.
A high-speed craft with composite hull
View Full Article top
Jarny Y.
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
View Full Article top
Jaschek K.
Contribution to the mechanical-mathematical
analysis of fibre composite stringer stiffened panels
View Full Article top
Jernot J-P.
How the morphology of a flax fibre
influences its mechanical behaviour
View Full Article top
Jesson D.A.
Fatigue failure of a composite sandwich
beam containing a central notch
View Full Article top
Jiang W.
Scaling effects in notched composites
View Full Article top
Jirsa J.O.
Performance monitoring of reinforced
concrete wrapped with FRPS
View Full Article top
Joffe R.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article
Damage detection in carbon fibre cross-ply
laminates by aid of carbon nanotube doped resin
View Full Article
Mechanical properties and failure of
non-crimp fabric composites subjected to shear stress
View Full Article top
Johansson H.
The optimised post-fitted foam sandwich
insert
View Full Article top
Johansson M.
Effects of dual cure and surface treatments
on coating adhesion to different smc-substrates
View Full Article
Combining hardness and flexibility in
coatings based on nanoparticle-filled hyperbranched polymers
View Full Article top
Johnson M.S.
Enhancement of the side emission efficiency
of commercial PMMA optical fibres in the UV-A and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
Jones F.R.
The investigation of fibre reinforcement
effects in thermoplastic materials: interfacial bond
strength and fibre end parameter
View Full Article
Optimisation of interfacial properties for
tensile strength by plasma polmerisation
View Full Article
Multiscale modelling of fibre reinforced
composites
View Full Article top
Järvelä P.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
K
Kakogiannis D.
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article top
Kalandaivdel P.
Numerical modelling of the behavior of
thermoplastic coomposite sandwich structures under localised
impact loading
View Full Article top
Kalle N.
Starch acetate n-fibre composites
View Full Article top
Kaloshkin S.D.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Kannan P.
Polymer composite nanofibres
View Full Article top
Karapappas P.
Nano-enhanced impact properties of carbon
fibre reinforced composites
View Full Article
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article top
Karbushev V.V.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Karger-Kocsis J.
Impact resistance of all-polypropylene
composites composed of alpha and beta modifications
View Full Article top
Karpate H.
Performance monitoring of reinforced
concrete wrapped with FRPS
View Full Article top
Kashtalyan M.
Predicting the residual stiffness properties
of carbon fibre/epoxy laminates loaded in thermal fatigue
View Full Article top
Katajisto H.
Cost efficient composite design methods
View Full Article top
Katayama T.
Environmental degradation of
stereocomplex-type polylactic acid fiber
View Full Article top
Katerelos D.T.G.
Secondary damage modes in laminates
initiated by intralaminar cracks
View Full Article top
Kato H.
Interfacial strength evaluation in a glass
fiber reinforced composite using cruciform specimen method
View Full Article top
Katsumata S.
Fracture behavior of CFRP laminate under
artificial lightning strike
View Full Article top
Kaufmann M.
Manufacturing process adaptation for the
cost/weight optimization of aircraft structures
View Full Article top
Kawada H.
Dimensional and geometrical stability of
CFRP laminates in hostile environment
View Full Article top
Kawamura T.
On a design method of
composite stem based on ct images
View Full Article top
Kawasaki T.
Environmental degradation of
stereocomplex-type polylactic acid fiber
View Full Article top
Kelly A.
Predicting the properties of particulate
composites- theory and experimental verification
View Full Article top
Kennedy A.
Carbon nanotubes-reinforcing mgo-doped al2o3
nanocomposites
View Full Article top
Kerman N.
Modelling the seam architectures for textile
performing
View Full Article top
Khellil K.
Contribution of damage mechanisms
comprehension of interlock-reinforced composite materials
View Full Article top
Khitrov V.
Free radial vibrations in three-layer
spherical sandwich shell
View Full Article top
Khokhar Z.R.
Matrix cracking and delamination in
cross-ply laminates: effect of randomness
View Full Article top
Kiasat M.S.
Modelling the development of warpage in
composite car body panels during curing
View Full Article top
Kiiko M.V.
Ni3Al-Mo multilayer composites: manufacture,
structure, properties
View Full Article
Oxide fibres for heat resistant composites
View Full Article top
Kim B.
Strain measurement of carbon composites
using advanced sensor technology
View Full Article top
Kim J-K.
Surfactant modified cnt/epoxy nanocomposites
for improved mechanical and functional properties
View Full Article top
Kipke P.
New developments in the field of ncf
technology - current status and their use in new
applications
View Full Article top
Kirkby E.
Low temperature moulding of adaptive
composites with embedded shape memory alloy wires
View Full Article top
Kissinger C.
New developments in the field of ncf
technology - current status and their use in new
applications
View Full Article top
Klimshin D.
Meso scale analysis of damage and stiffness
degradation in ncf composites
View Full Article top
Knipprath C.
A simplified discrete finite element model
for non-crimp fabric composites
View Full Article top
Kobayashi S.
Interfacial strength evaluation in a glass
fiber reinforced composite using cruciform specimen method
View Full Article top
Kobayashi Y.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article top
Koerber H.
Simulation of progressive damage in bolted
composite joints
View Full Article top
Kogo Y.
Direct measurement on fracture toughness of
carbon fibre
View Full Article top
Koissin V.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article top
Kolchin A.A.
Oxide fibres for heat resistant composites
View Full Article top
Kollar L.
Buckling of composite plates subjected to
shear and linerly varrying loads
View Full Article top
Koncar V.
Geometrical modelling of 3d textile
composite application to warp interlock carbon fabrics
View Full Article top
Konda M.
Evaluation of anisotropic deformation and
fracture properties in extruded HAp/PLLA composites
View Full Article top
Kong C.
A study on residual strength of al honeycomb
core sandwich composite panel after quasi-static indentation
damage
View Full Article top
Kong K.
Deformation micromechanics of glass fibre
based and hybrid cellulose-glass fibre composites
View Full Article top
Kononova O.
Crack's propagation in short steel fiber
reinforced concrete. Modeling and experimental investigation
View Full Article top
Konstantinov I.I.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Kostopoulos V.
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article
Nano-enhanced impact properties of carbon
fibre reinforced composites
View Full Article top
Kotani M.
Effect of the fiber/matrix interface on the
in situ fiber performance of PIP-SiC/SiC composite
View Full Article
The role of a polymer-derived matrix on the
tensile performance of SiC/SiC composite
View Full Article top
Kotomin S.V.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Kotsikos G.
Viscoelastic behaviour of composite
laminates from quantitative DMTA
View Full Article top
Koyanagi J.
Dimensional and geometrical stability of
CFRP laminates in hostile environment
View Full Article top
Kozlowska A.
Influence of fibers modification on
biocomposite properties
View Full Article top
Kozlowski M.
Influence of fibers modification on
biocomposite properties
View Full Article top
Krasnikovs A.
Crack's propagation in short steel fiber
reinforced concrete. Modeling and experimental investigation
View Full Article top
Krishnamoorthy S.
Fast joining and repairing of sandwich
materials with detachable mechanical connection technology
View Full Article top
Kristian Zi.
Analysis and manufacturing of ultra thick
laminates for future aircraft applications
View Full Article top
Kruse F.F.
Modelling the seam architectures for textile
performing
View Full Article top
Kulichikhin V.G.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Kurashiki T.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article
A numerical simulation of damage development
for laminated woven fabric composites
View Full Article
Multiscale analysis of material damping
properties for textile composites
View Full Article
Predictive analyses and experimental
validations of effective elastic properties of2D and 3D
woven composites
View Full Article
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article
On a design method of
composite stem based on ct images
View Full Article top
Kustermans J.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article top
L
Ladavos A.
Preparation and characterization of
exfoliated ldpe/organolaponite nanocomposites
View Full Article top
Ladevèze P.
Validation of the damage mesomodel for
laminated composites
View Full Article
Toward a virtual material for lifetime
prediction of CMCs
View Full Article
An enhanced computational micromodel for
CFRP laminates
View Full Article
Identification and validation of a
multi-physic macro model for the lifetime prediction of
self-healing ceramic matrix composites
View Full Article top
Ladstaetter E.
The effect of tension-tension fatigue and
lay-up configuration on damage accumulation in carbon/epoxy
composites
View Full Article top
Lafarie-Frenot M.C.
Coupled mechanical-chemical simulation of an
oxidized CFRP composite
View Full Article top
Laforêt A.
Static fatigue of multifilament tows at high
temperatures above 900°c
View Full Article top
Laguardia L.
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Lahellec N.
A ply scale non local approach to describe
the failure of laminated structure
View Full Article top
Lamkanfi E.
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
Strain distribution in a biaxially loaded
curciform composite specimen
View Full Article
Biaxial mechanical fatigue using cruciform
composite specimens
View Full Article top
Lamon J.
Static fatigue of multifilament tows at high
temperatures above 900°c
View Full Article top
Larberg Y.
On the interply friction of different
generations of unidirectional prepreg materials
View Full Article top
Larsson R.
Two-phase continuum modelling of composites
consolidation
View Full Article
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Lascoup B.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article
Impact behavior of automotive shock
absorbing beam: experimental and numerical representation
View Full Article top
Laurent C.
Processing using reactive amphiphilic
molecules, characterization and properties of double-walled
carbon nanotubes filled epoxy nanocomposites
View Full Article top
Laurin F.
Progressive damage and
strength of bolted joints in composite structures
View Full Article
Strength analysis of composite structures
with uncertainty assessment
View Full Article top
Le Lay L.
Application of composite materials for
lightweight and smart structures design of high performance
milling machines
View Full Article top
Le T.H.
Modelling and simulation of the rheology of
bulk moulding compounds (BMC) during mould filling
View Full Article top
Leduc D.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Lee B.S.
Manufacture of CNT reinforced polymer
composites using nanofibers containing CNT
View Full Article top
Lee S.
A study on residual strength of al honeycomb
core sandwich composite panel after quasi-static indentation
damage
View Full Article top
Legrand X.
Geometrical modelling of 3d textile
composite application to warp interlock carbon fabrics
View Full Article top
Lehmann D.
Development and characterization of ptfe
nanopowder-elastomeric composites for tribological
allpications
View Full Article top
Lei S.Y.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article top
Leitão E. da S.
Mechanical characterization of polymerics
composites winding in diverse reinforced orientation of the
reinforcement
View Full Article top
Lemistre M.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Leone C.
Composite materials characterization by
acoustic emission technique
View Full Article top
Lepper M.
Analytical methods for the stress
concentration analysis of multilayered anisotropic
composites with pin-loaded holes
View Full Article top
Lesko J.
Development of a multifunctional composite
fuel cell
View Full Article top
Lessard L.
Simultaneous structural and manufacturing
optimization of composite parts using normal constraint
method
View Full Article
Mechanical failure of a composite helicopter
structure under static loading
View Full Article top
Levin K.
Damage location in complex structures
subjected to multi-modal wave using elliptical algorithm and
modified acoustic emission technique
View Full Article top
Levy A.
Ultrasonic welding of thermoplastic
composites, modeling of the process
View Full Article top
Li H.J.
Experimental study of sandwich panel under
impact loading
View Full Article top
Li J.
Surfactant modified cnt/epoxy nanocomposites
for improved mechanical and functional properties
View Full Article top
Lilholt H.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article top
Lindblad J.
An automated image analysis method for
measuring fibre contact in fibrous and composite materials
View Full Article top
Lindström M.
Hierarchical design as a tool in development
of wood-based composite applications
View Full Article
Hygroexpansion of wood-fibre composite
materials: effects of cell-wall cross-linking and
composition of thermoplastic matrix
View Full Article top
Linghoff D.
Design methods for composite reinforced
metallic beams
View Full Article top
Liotier P.J.
Introduction to the characterization of
hygrothermal microcracking of composites reinforced by
stitched non-woven UD laminas
View Full Article top
Liu M.Y.
Surfactant modified cnt/epoxy nanocomposites
for improved mechanical and functional properties
View Full Article top
Llorca J.
Mechanical behavior of interpenetrating al-sic composites
derived from wood templates
View Full Article top
Lomov S.
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article top
Lomov S.V.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article
Simulating and validating the draping of
woven fibre reinforced polymers
View Full Article
Predictive analyses and experimental
validations of effective elastic properties of2D and 3D
woven composites
View Full Article
Impact and post-impact properties of carbon
fibre non-crimp fabric composites
View Full Article
Meso scale analysis of damage and stiffness
degradation in ncf composites
View Full Article top
Long A.
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article top
Long A.C.
The permeability of random discontinuous
carbon fibre preforms
View Full Article top
Lopresto V.
Composite materials characterization by
acoustic emission technique
View Full Article top
Lory P.
Experimental identification of fatigue
damage model for short glass fibre reinforced thermoplastic
composites
View Full Article top
Louca L.A.
Numerical study of the effect of a
core-adjacent layer of polyurea on the blast energy
absorption of a sandwich T-joint
View Full Article top
Loutas T.
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article top
Lubineau G.
Validation of the damage mesomodel for
laminated composites
View Full Article
Toward a virtual material for lifetime
prediction of CMCs
View Full Article
An enhanced computational micromodel for
CFRP laminates
View Full Article top
Luinge J.W.
Integrity of composite aircraft fuselage
materials under crash fire conditions
View Full Article top
Lundmark P.
Micromechanical vs lamina based failure
theories
View Full Article top
Lundström M.
Effects of dual cure and surface treatments
on coating adhesion to different smc-substrates
View Full Article top
Lupi C.
In situ and quantitative control of resin
transfer moulding (rtm) using fibres optic sensors
View Full Article top
Lusiani M.
Damage evolution in composite bonded joints under fatigue
loading
View Full Article
Crack propagation
assessment in composite bonded joints
View Full Article top
Lutz A.
Testing and analysis of a highly loaded
composite flange
View Full Article top
Luyckx G.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Luyt A.S.
Thermal and mechanical properties of
PP/EVA/WP and MAPP/EVA/PP polymer blend composites
View Full Article top
Lönnberg H.
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Lönnö A.
A high-speed craft with composite hull
View Full Article top
Lööf P-J.
Automation from an automotive perspective
View Full Article top
M
Madsen B.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article top
Maedza B.H.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article top
Maffezzoli A.
Evaluation of impact damage behavior of
repeatedly impacted composites embedding steel and shape
memory alloy fibres
View Full Article top
Mahajan P.
Machining of UD- CFRP composites:
experiments and finite element modeling
View Full Article top
Maire E.
3D-porosity structural analysis of long -
fiber - renforced ceramic matrix composites using X-ray
tomography
View Full Article top
Maire J.F.
Progressive damage and
strength of bolted joints in composite structures
View Full Article
A macroscopic visco-elastic-damage model for
three dimensional woven fabric composites
View Full Article
Strength analysis of composite structures
with uncertainty assessment
View Full Article top
Makris A.
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
Strain distribution in a biaxially loaded
curciform composite specimen
View Full Article
Biaxial mechanical fatigue using cruciform
composite specimens
View Full Article top
Malmberg F.
An automated image analysis method for
measuring fibre contact in fibrous and composite materials
View Full Article top
Malmström E.
Combining hardness and flexibility in
coatings based on nanoparticle-filled hyperbranched polymers
View Full Article
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Mamun A.A.
Characterization of grain byproducts and
properties of its biodegrade composites
View Full Article top
Manca M.
Evaluation of impact damage behavior of
repeatedly impacted composites embedding steel and shape
memory alloy fibres
View Full Article top
Mantič V.
Effect of curing stresses on the inter-fibre
failure under transverse compression
View Full Article
Failure of adhesively bonded joints.
Analysis of experimental results by analysis of experimental
results by nominal and local approach
View Full Article top
Marcin L.
A macroscopic visco-elastic-damage model for
three dimensional woven fabric composites
View Full Article top
Marcovich N.E.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Marinucci G.
Mechanical characterization of polymerics
composites winding in diverse reinforced orientation of the
reinforcement
View Full Article top
Marissen R.
Modelling the development of warpage in
composite car body panels during curing
View Full Article top
Marklund E.
Numerical simulations of metal onto
composites casting
View Full Article
Micromechanical modeling of wood fiber
composites
View Full Article top
Marques A.T.
Use of composite materials in public service
vehicles
View Full Article
New thermoplastic matrix composites for
demanding applications
View Full Article
Cohesive mixed-mode damage model applied to
the simulation of the mechanical behaviour of a repaired
sandwich beams
View Full Article top
Marsal D.
Contribution of damage mechanisms
comprehension of interlock-reinforced composite materials
View Full Article top
Martin R.H.
Development of high performance furan-based
bio-composites for vehicle panels
View Full Article top
Martínez R.
Out of autoclave curing of thermoset
materials
View Full Article top
Marulo F.
Evaluation and validation of multi-physics
fe methods to simulate bird strike on a wing leading edge
View Full Article top
Maslakova A.G.
Prediction of deformation and biaxial
strength of fibre reinforced laminates for wwfe by using
micromechanics
View Full Article top
Maso J.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article top
Matsumoto K.
Multiscale analysis of material damping
properties for textile composites
View Full Article top
Mattoso L.H.C.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Mattsson D.
Numerical simulations of metal onto
composites casting
View Full Article
Micromechanical vs lamina based failure
theories
View Full Article top
Maurin R.
Seawater ageing of low styrene emission resins
for marine composites: mechanical behaviour and nano-indentation studies
View Full Article top
May M.
Modelling mode i crack initiation in
composites under fatigue loading using interface elements
View Full Article top
Mazahery A.
Hardness and tensile strength study on Al356
alloy matrix-nano Al2O3 particle
reiforced composite
View Full Article top
Mazerolle F.
A ply scale non local approach to describe
the failure of laminated structure
View Full Article top
McCartney L.N.
Predicting the properties of particulate
composites- theory and experimental verification
View Full Article
Approximate method of predicting ply crack
View Full Article top
Medeiros E.S.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Medina L.A.
Water glass as hydrophobic and flame
retardant additive for natural fiber reinforced composites
View Full Article top
Meer van der F. P.
A computational model for failure in composite laminates
including delamination, interfiber failure at fibre failure
View Full Article top
Meneghetti G.
Damage evolution in composite bonded joints under fatigue
loading
View Full Article
Crack propagation
assessment in composite bonded joints
View Full Article top
Meo F.
Application of composite materials for
lightweight and smart structures design of high performance
milling machines
View Full Article top
Meo M.
Delamination modelling using an element free
galerkin approach
View Full Article
Evaluation and validation of multi-physics
fe methods to simulate bird strike on a wing leading edge
View Full Article top
Meraghni F.
Experimental identification of fatigue
damage model for short glass fibre reinforced thermoplastic
composites
View Full Article
Investigation of the interfacial debonding
in a shape memory alloy (NiTi) fibre reinforced epoxy matrix
composite
View Full Article top
Merino C.
Manufacture methods comparison and
characterization of conductive glass reinforced plastics by
adding carbon nanofibres
View Full Article top
Merlo A.
Application of composite materials for
lightweight and smart structures design of high performance
milling machines
View Full Article
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Meyer L.O.
Damage sensing with nanocomposite/glass-fibre
hybrid composites via electrical conductivity methods
View Full Article top
Miano V.U.
Phenolic and polyester pultrusions underload
in fire: development of a failure model
View Full Article top
Michaud V.
Low temperature moulding of adaptive
composites with embedded shape memory alloy wires
View Full Article
Conduction in composites with highly
conductive short fibres: comparison between experiments,
discrete element simulation and analytical solution
View Full Article
Potentiality of optical fibre bragg grating
sensors for resin transfer moulding process monitoring
View Full Article top
Mileiko S.T.
Oxide fibres for heat resistant composites
View Full Article top
Milička K.
Back stresses in creep of 2024Al-saffil
fibre composite
View Full Article
Creep of Ax41 magnesium alloy matrix
composites with alumina and carbon short fibers
View Full Article top
Mills A.R.
Investigation of preform manufacturing
techniques using novel binder coated carbon fibre tows
View Full Article top
Miot S.
A ply scale non local approach to describe
the failure of laminated structure
View Full Article top
Mirisiotis L.S.
Experimental investigation of composite
patch reinforced corroded steel plates in static loading
View Full Article top
Mishnaevsky Jr L.
Fiber bridging in gfrp composites:
mesomechanical analysis
View Full Article top
Mitschang P.
Process parameters for induction welding of
metal/composite joints
View Full Article top
Mochkina I.V.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Moden C.S.
The transverse off-axis stiffness and
strength of softwood
View Full Article top
Moffat A.
Very high resolution computed tomography of
damage in laminated composites
View Full Article top
Moffitt R.
Development of a multifunctional composite
fuel cell
View Full Article top
Mohanty L.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Momoji Y.
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article
A numerical simulation of damage development
for laminated woven fabric composites
View Full Article top
Montagna F.
Evaluation of impact damage behavior of
repeatedly impacted composites embedding steel and shape
memory alloy fibres
View Full Article top
Monte de M.
Multiaxial fatigue behaviour of a
short-fibre reinforced polyamide 6.6 in the presence of
notches
View Full Article top
Montés N.
Methodology for applying computational
techniques in the advanced manufacture of composites through
artificial vision
View Full Article top
Moosbrugger E.
Multiaxial fatigue behaviour of a
short-fibre reinforced polyamide 6.6 in the presence of
notches
View Full Article top
Morales G.
Manufacture methods comparison and
characterization of conductive glass reinforced plastics by
adding carbon nanofibres
View Full Article top
Morales-Rodríguez A.
3D-porosity structural analysis of long -
fiber - renforced ceramic matrix composites using X-ray
tomography
View Full Article top
Moriyama M.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article top
Mosiewicki M.A.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Mostofi H.
Modelling the development of warpage in
composite car body panels during curing
View Full Article top
Motevasseli A.S.
The influence of aspect ratio of reinforcing
fibers on mechanical properties of gypsum matrix composite
panels
View Full Article top
Moura de M.F.S.F.
Cohesive mixed-mode damage model applied to
the simulation of the mechanical behaviour of a repaired
sandwich beams
View Full Article top
Mouret A.
Toward a virtual material for lifetime
prediction of CMCs
View Full Article
Identification and validation of a
multi-physic macro model for the lifetime prediction of
self-healing ceramic matrix composites
View Full Article top
Mulle M.
Through-the-thickness material properties
identification using 3D-DIC and FBG measurements
View Full Article top
Múnez C.J.
High-power diode laser welding of highly
reinforced Al-SiC composites
View Full Article top
Mungalov D.
Predictive analyses and experimental
validations of effective elastic properties of2D and 3D
woven composites
View Full Article top
Månson J.A.E.
Micromechanics of composites with integrated
shear thickening fluids
View Full Article
Potentiality of optical fibre bragg grating
sensors for resin transfer moulding process
View Full Article
Low temperature moulding of adaptive
composites with embedded shape memory alloy wires
View Full Article top
Mäder E.
Cyclic loading of the interphase in single
fibre model composites
View Full Article top
Möcke D.
New developments in the field of ncf
technology - current status and their use in new
applications
View Full Article top
Möhle E.
Description and modelling of the multi-axial
stiffness degradation in fatigue loaded NCFs under sequence
loading
View Full Article top
N
Naify C.
Acoustics of sandwich structures - an
overview
View Full Article top
Nakai H.
A numerical simulation of damage development
for laminated woven fabric composites
View Full Article
Predictive analyses and experimental
validations of effective elastic properties of2D and 3D
woven composites
View Full Article
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article top
Nakamura R.
Effect of yarn twist on Young's modulus of
fully-green composites reinforced with ramie woven fabrics
View Full Article top
Nakanishi Y.
Multiscale analysis of material damping
properties for textile composites
View Full Article top
Nasri I.
Experimental study of sandwich panel under
impact loading
View Full Article top
Nauman S.
Geometrical modelling of 3D textile
composite application to warp interlock carbon fabrics
View Full Article top
N'Diaye P.
Impact behavior of automotive shock
absorbing beam: experimental and numerical representation
View Full Article top
Neagu C.
Micromechanics of composites with integrated
shear thickening fluids
View Full Article top
Nevalainen K.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
Neves P.
Use of composite materials in public service
vehicles
View Full Article
Neves P.C.
Structural health-monitoring of gfrp
structures using embedded fibre Bragg gratings
View Full Article top
Nilsson G.
Investigation of the relaxed shape of partly
cured thermoset composite materials
View Full Article top
Nilsson H.
Viscosity of chitosan/montmorillonite
mixtures for coatings for paperboard packages
View Full Article top
Nilsson S.
Effects of CFRP laminate thickness on the
bending after impact strength
View Full Article top
Nishino M.
Design method of API high pressure FRP pipe
View Full Article top
Nishino Y.
Cross-point binders for glass fiber mat
utilizing electronic ion effect
View Full Article
Manufacturing know-how using self-condensing
binder for glass fiber mat
View Full Article top
Nogués F.
Composites from ground tyre rubber. effect
of surface modification by wetting additives
View Full Article top
Nomura H.
Effect of yarn twist on Young's modulus of
fully-green composites reinforced with ramie woven fabrics
View Full Article top
Nordlund M.
Potentiality of optical fibre bragg grating
sensors for resin transfer moulding process monitoring
View Full Article top
Nouri H.
Experimental identification of fatigue
damage model for short glass fibre reinforced thermoplastic
composites
View Full Article top
Novokhatskaya N.I.
Oxide fibres for heat resistant composites
View
Full Article top
Nunes J.P.
New thermoplastic matrix composites for
demanding applications
View Full Article top
Nutt S.
Three-dimensional open-cellular materials
formed from self-propagating polymer waveguides
View Full Article
Formable sandwich cores with non-conventional cell shapes
View Full Article
Acoustics of sandwich structures - an
overview
View Full Article top
Nyman T.
A simplified method for predictions of shape
distortions
View Full Article top
O
Oberg L.
Viscosity of chitosan/montmorillonite mixtures for coatings for
paperboard packages
View Full Article top
O'Neill C.
Design and analysis of a composite energy
absorbing railcab nosecone
View Full Article top
Obst A.
Hybrid composite laminates for
high-performance bolted joints
View Full Article top
Ogasawara T.
The role of a polymer-derived matrix on the
tensile performance of SiC/SiC composite
View Full Article top
Ogihara S.
Direct measurement on fracture toughness of
carbon fibre
View Full Article
Effect of the fiber/matrix interface on the
in situ fiber performance of PIP-SiC/SiC composite
View Full Article
Interfacial strength evaluation in a glass
fiber reinforced composite using cruciform specimen method
View Full Article top
Ogin S.L.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article
Design allowables: considering the tensile
and compressive behaviour of notched and unnotched CFRP
View Full Article
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article
Intralaminar fatigue crack initiation and
growth in off-axis plies of composite laminates
View Full Article top
Ohgi J.
Effect of stress ratio on the fatigue crack
growth behaviour of C/C composites
View Full Article
Effect of yarn twist on Young's modulus of
fully-green composites reinforced with ramie woven fabrics
View Full Article top
O'Keane J.
Low temperature moulding of adaptive
composites with embedded shape memory alloy wires
View Full Article top
Oldenbo M.
Strength and fatigue analysis of assembled
components in SMC composite using principal strain history
View Full Article top
Oliveira de R.
Low temperature moulding of adaptive
composites with embedded shape memory alloy wires
View Full Article
Potentiality of optical fibre bragg grating
sensors for resin transfer moulding process monitoring
View Full Article top
Olivier L.
Coupled mechanical-chemical simulation of an
oxidized CFRP composite
View Full Article top
Olivier P.
Processing using reactive amphiphilic
molecules, characterization and properties of double-walled
carbon nanotubes filled epoxy nanocomposites
View Full Article
Through-the-thickness material properties
identification using 3D-DIC and FBG measurements
View Full Article top
Olofsson K.
A high-speed craft with composite hull
View Full Article top
Olsson R.
Simplified model for large mass impact and
delamination onset in curved laminates
View Full Article
Compressive properties of impact damage in
composite laminates determined by an inverse method
View Full Article
Micromechanical finite element study of
impact damaged fractured fibres under compression
View Full Article top
Orgéas L.
Conduction in composites with highly
conductive short fibres: comparison between experiments,
discrete element simulation and analytical solution
View Full Article
Modelling and simulation of the rheology of
bulk moulding compounds (BMC) during mould filling
View Full Article top
Orts W.J.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Ostlund C.
An automated image analysis method for
measuring fibre contact in fibrous and composite materials
View Full Article top
P
Paepegem van W.
A clamped three-point bending setup for
fatigue of thin composite laminates
View Full Article
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
Strain distribution in a biaxially loaded
curciform composite specimen
View Full Article
Biaxial mechanical fatigue using cruciform
composite specimens
View Full Article
A modified three-rail shear test for fatigue
of composite laminates
View Full Article top
Page le B.H.
Fatigue failure of a composite sandwich
beam containing a central notch
View Full Article top
Paget C.A.
Damage location in complex structures
subjected to multi-modal wave using elliptical algorithm and
modified acoustic emission technique
View Full Article top
Pahr D.H.
Assessment of mixed uniform boundary
conditions for predicting the macroscopic mechanical
behavior of composite materials
View Full Article top
Paipetis A.
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article
Nano-enhanced impact properties of carbon
fibre reinforced composites
View Full Article top
Palaniappan J.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Palanivelu S.
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article top
Palmer J.
Recyclate fibres -matrix interface analysis
for reuse in sheet mould compounds (SMC)
View Full Article top
Pandini S.
Epoxy/layered-silicate nanocomposites:
effect of the matrix composition on large deformation and
fracture behaviour
View Full Article top
Pang S.
Durability of wood
flour-recycled thermoplastics composites under accelerated
freeze-thaw cycles
View Full Article top
Pappadà S.
Evaluation of impact damage behavior of
repeatedly impacted composites embedding steel and shape
memory alloy fibres
View Full Article top
París F.
Effect of curing stresses on the inter-fibre
failure under transverse compression
View Full Article
Failure of adhesively bonded joints.
Analysis of experimental results by analysis of experimental
results by nominal and local approach
View Full Article top
Park H.
A study on residual strength of al honeycomb
core sandwich composite panel after quasi-static indentation
damage
View Full Article top
Parneix P.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Pasini D.
Simultaneous structural and manufacturing
optimization of composite parts using normal constraint
method
View Full Article top
Pastor J.Y.
Mechanical behavior of interpenetrating al-sic composites
derived from wood templates
View Full Article top
Patoor E.
Investigation of the interfacial debonding
in a shape memory alloy (NiTi) fibre reinforced epoxy matrix
composite
View Full Article top
Paul C.
Manufacturing method for symmetric laminates
from improved stitch bonded multi-plies
View Full Article top
Payandeh Y.
Investigation of the interfacial debonding
in a shape memory alloy (NiTi) fibre reinforced epoxy matrix
composite
View Full Article top
Peairs D.
Development of a multifunctional composite
fuel cell
View Full Article top
Pechnik N.
Initiation and propagation mechanisms of
progressive crushing in carbon-epoxy laminated plates
View Full Article top
Pedro J.
Hydroelastic tailoring and optimization of a
composite marine propeller
View Full Article top
Peigney A.
Processing using reactive amphiphilic
molecules, characterization and properties of double-walled
carbon nanotubes filled epoxy nanocomposites
View Full Article top
Peijs T.
Fatigue properties of highly oriented
polypropylene tapes and all-polypropylene composites
View Full Article top
Peng H.X.
Microstructurally inhomogeneous composites
with tailored reinforcement distribution
View Full Article top
Perez L.
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
View Full Article top
Perreux D.
Influence of the consolidating pressure of
thermoplastic prepregs on the mode i critical energy release
rate
View Full Article
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Perrot Y.
Seawater ageing of low styrene emission resins
for marine composites: mechanical behaviour and nano-indentation studies
View Full Article top
Peters P.
Acoustics of sandwich structures - an
overview
View Full Article top
Petiot C.
Initiation and propagation mechanisms of
progressive crushing in carbon-epoxy laminated plates
View Full Article top
Pettersson M.
Automation from an automotive perspective
View Full Article top
Phani S.
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Phiri G.G
Kenaf Fibre as Reinforcement in
Aliphatic-Aromatic Co-polyester Bio-composites
View Full Article top
Pickett A.K.
A simplified discrete finite element model
for non-crimp fabric composites
View Full Article top
Pietropaoli E.
Delamination growth and fibre/matrix
progresive damage in composite plates under compression
View Full Article top
Pimenta S.
Hybrid composite laminates for
high-performance bolted joints
View Full Article top
Pingle S.
Simulated properties of hollow pyramidal
lattice truss structures
View Full Article top
Pinho S.T.
Physical mechanisms associated with
initiation and propagation of kink-bands
View Full Article
Design and analysis of a compact tension
(CT) specimen for intralaminar fracture toughness
characterisation of woven composite laminates
View Full Article
A pressure-dependent constitutive model with
failure for laminated composites
View Full Article top
Plaete O.
Manufacture methods comparison and
characterization of conductive glass reinforced plastics by
adding carbon nanofibres
View Full Article top
Plantin M.
Automation from an automotive perspective
View Full Article top
Pohlmann T.
Bismaleimide composites: unusual processing
techniques
View Full Article top
Poitou A.
Ultrasonic welding of thermoplastic
composites, modeling of the process
View Full Article top
Połeć I.
Understanding the links between structure
and properties in die drawing wood powder polymer composites
View Full Article top
Polyakov V.
Free radial vibrations in three-layer
spherical sandwich shell
View Full Article top
Polycarpe J.
The transverse off-axis stiffness and
strength of softwood
View Full Article top
Ponsaud P.
Out of autoclave curing of thermoset
materials
View Full Article top
Popov V.A.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Porter D.
Multiscale modelling of fibre reinforced
composites
View Full Article top
Potluri P.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article top
Povarova K.B.
Ni3Al-Mo multilayer composites: manufacture,
structure, properties
View Full Article top
Prolongo S.G.
Carbon nanofibers reinforced adhesives for
joining carbon fiber epoxy composites
View Full Article top
Prota A.
Numerical estimates of composite sandwich
response to quasi static impact
View Full Article top
Pupurs A.
Crack's propagation in short steel fiber
reinforced concrete. Modeling and experimental investigation
View Full Article top
Pönninger A.
The effect of tension-tension fatigue and
lay-up configuration on damage accumulation in carbon/epoxy
composites
View Full Article top
Q
Qian H.
Hierarchical composites with carbon nanotube
grafted fibres
View Full Article top
Quaresimin M.
Crack propagation
assessment in composite bonded joints
View Full Article
Multiaxial fatigue behaviour of a
short-fibre reinforced polyamide 6.6 in the presence of
notches
View Full Article
Damage evolution in composite bonded joints under fatigue
loading
View Full Article top
Quispitupa A.
Fatigue debond growth in sandwich structures
loaded in mixed mode bending (MMB)
View Full Article top
R
Raghavan J.
Bio-composites from canola oil based resin
and hemp and flax fibers
View Full Article top
Ramantani D.A.
Cohesive mixed-mode damage model applied to
the simulation of the mechanical behaviour of a repaired
sandwich beams
View Full Article top
Ramault C.
Biaxial mechanical fatigue using cruciform
composite specimens
View Full Article
Effect of geometry on the strain
distribution in composite cruciform specimens under biaxial
loading
View Full Article
Strain distribution in a biaxially loaded
curciform composite specimen
View Full Article top
Rametta R.
Evaluation of impact damage behavior of
repeatedly impacted composites embedding steel and shape
memory alloy fibres
View Full Article top
Ramirez F.A.
Evaluation of environmental effects on
polymer matrix composites by micromechanical and
macromechanical tests
View Full Article
Fracture mechanics analysis of single fiber
fragmentation test
View Full Article top
Rams J.
High-power diode laser welding of highly
reinforced Al-SiC composites
View Full Article top
Rao G.V.
Machining of UD- CFRP composites:
experiments and finite element modeling
View Full Article top
Reck B.
Influence of the consolidating pressure of
thermoplastic prepregs on the mode I critical energy release
rate
View Full Article top
Reed G.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Reif W.
Microstructure and tensile properties of
extruded 7475 Al-Al2O3 particle
composites
View Full Article top
Rezaeepazhand J.
Transient response of a three layer sandwich
plate with
View Full Article top
Rhead A.T.
A static compressive strength model for
damaged composite laminates
View Full Article top
Ricciardi D.
Application of composite materials for
lightweight and smart structures design of high performance
milling machines
View Full Article top
Riccio A.
Delamination growth and fibre/matrix
progresive damage in composite plates under compression
View Full Article top
Riccio M.
Evaluation and validation of multi-physics
fe methods to simulate bird strike on a wing leading edge
View Full Article top
Richardson T.
Polyaniline modified nanocellulose as
reinforcement of a shape memory polyurethane
View Full Article top
Ricotta M.
Damage evolution in composite bonded joints under fatigue
loading
View Full Article
Crack propagation
assessment in composite bonded joints
View Full Article top
Rinker M.
Experimental and theoretical investigation
of thermal stress in CFRP-Foam-sandwich structures
View Full Article top
Rivallant S.
Initiation and propagation mechanisms of
progressive crushing in carbon-epoxy laminated plates
View Full Article top
Robinet P.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Robinson M.
Design and analysis of a composite energy
absorbing railcab nosecone
View Full Article top
Robinson P.
Physical mechanisms associated with
initiation and propagation of kink-bands
View Full Article
A pressure-dependent constitutive model with
failure for laminated composites
View Full Article
Design and analysis of a compact tension
(CT) specimen for intralaminar fracture toughness
characterisation of woven composite laminates
View Full Article top
Rohatgi P.
Microstructure and tensile properties of
extruded 7475 Al-Al2O3 particle
composites
View Full Article top
Rosa de I. M.
Characterization of indentation damage on
carbon/epoxy laminates by means of acoustic emission
View Full Article top
Rosén B-G.
Automation from an automotive perspective
View Full Article top
Roy S.
Mechanical failure of a composite helicopter
structure under static loading
View Full Article
Damage evolution and anisotropy in freeze
cast metal/ceramic composites: an in-situ SEM analysis
View Full Article top
Ruf R.
High impact modification of PLA with natural
rubber and the influence of fiber content, fiber length on
the impact strength of pla-flax-natural rubber composites
View Full Article top
Rumkovska I.
Development of test methods for adhesion
measurements of flexible elastic materials
View Full Article top
S
Sakamoto Y.
Interfacial strength evaluation in a glass
fiber reinforced composite using cruciform specimen method
View Full Article top
Salehi M.
Influence of van der Waals interaction on
the mechanical properties of single-walled carbon nanotubes
with introducing effective wall thickness
View Full Article top
Salazar J.M.G de
Manufacture methods comparison and
characterization of conductive glass reinforced plastics by
adding carbon nanofibres
View Full Article top
Sánchez F.
Methodology for applying computational
techniques in the advanced manufacture of composites through
artificial vision
View Full Article top
Sánchez Gómez J.
Out of autoclave curing of thermoset
materials
View Full Article top
Sánchez J.
Carbon nanofibers reinforced adhesives for
joining carbon fiber epoxy composites
View Full Article top
Santis de R.
Epoxy/layered-silicate nanocomposites:
effect of the matrix composition on large deformation and
fracture behaviour
View Full Article top
Santulli C.
Characterization of indentation damage on
carbon/epoxy laminates by means of acoustic emission
View Full Article top
Sapozhnikov S.B.
Prediction of deformation and biaxial
strength of fibre reinforced laminates for wwfe by using
micromechanics
View Full Article top
Sarasini F.
Characterization of indentation damage on
carbon/epoxy laminates by means of acoustic emission
View Full Article top
Saunders M.
Numerical study of the effect of a
core-adjacent layer of polyurea on the blast energy
absorption of a sandwich T-joint
View Full Article top
Savage L.
Recyclate fibres -matrix interface analysis
for reuse in sheet mould compounds (SMC)
View Full Article top
Scheerer M.
The effect of tension-tension fatigue and
lay-up configuration on damage accumulation in carbon/epoxy
composites
View Full Article top
Schledjewski R.
Investigation of testing mechanisms by
doping of bonding surfaces with nano particles
View Full Article top
Schmidt F.
Description and modelling of the multi-axial
stiffness degradation in fatigue loaded NCFs under sequence
loading
View Full Article top
Schneider J.
Contribution of damage mechanisms
comprehension of interlock-reinforced composite materials
View Full Article top
Schreiber J.
Thermo - hydromechanical compression of fast
growing poplar from short term plantation
View Full Article top
Schrief M.
New developments in the field of ncf
technology - current status and their use in new
applications
View Full Article top
Schulte K.
Functional properties of nanocomposite epoxy
matrix systems for strain-sensing applications
View Full Article
Influence of voids on the degradation of
CFRP under fatigue loading
View Full Article
Damage sensing with nanocomposite/glass-fibre
hybrid composites via electrical conductivity methods
View Full Article top
Schulze P.
Design and fabrication of vartm fabricated
skin panels with integrated hollow hat stiffeners
View Full Article top
Schäuble R.
Experimental and theoretical investigation
of thermal stress in CFRP-Foam-sandwich structures
View Full Article top
Seddon A.B.
Enhancement of the side emission efficiency
of commercial PMMA optical fibres in the UV-A and visible
blue spectrum for photocuring of epoxy resins
View Full Article top
Semakov A.V.
Improved techniques for obtaining
polymer-nanodiamond composites with enhanced properties
View Full Article top
Serebryakov A.V.
Oxide fibres for heat resistant composites
View Full Article top
Setiabudi
Benzoxazine Chemistry: A New Material to
meet Fire Retardant Challenges of Aerospace Interiors
applications
View Full Article top
Shaffer M.S.P.
Hierarchical composites with carbon nanotube
grafted fibres
View Full Article top
Shahzad M.A.
Study of the grindability of powder
metallurgically produced aluminum metal matrix composite (Al
- MMC)
View Full Article top
Shaw R.M.
Assessment of the applicability of
compression-after-after-impact
(CAI) and open-hole tension (OHT) methods for use under
fatigue loading
View Full Article top
Shi X.M.
Surfactant modified cnt/epoxy nanocomposites
for improved mechanical and functional properties
View Full Article top
Shimosakon T.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article
Design method of API high pressure FRP pipe
View Full Article top
Shokri P.
Fiber orientation at the mid-plane in
injection molding of reinforced thermoplastics
View Full Article top
Shokrieh M.M.
Influence of van der Waals interaction on
the mechanical properties of single-walled carbon nanotubes
with introducing effective wall thickness
View Full Article top
Siddiq M.A.
Ultrasonic consolidation as novel
manufacturing technique in embedding passive/active fibres
in metal matrices
View Full Article top
Siemetzki M.
Analysis and manufacturing of ultra thick
laminates for future aircraft applications
View Full Article top
Silberschmidt V.V.
Matrix cracking and delamination in
cross-ply laminates: effect of randomness
View Full Article top
Silva J.F.
New thermoplastic matrix composites for
demanding applications
View Full Article top
Silvain J.F.
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
View Full Article top
Sinclair I.
Very high resolution computed tomography of
damage in laminated composites
View Full Article top
Sitton D.
Development of a multifunctional composite
fuel cell
View Full Article top
Sjunnesson A.
Testing and analysis of a highly loaded
composite flange
View Full Article top
Skachkov O.A.
Ni3Al-Mo multilayer composites: manufacture,
structure, properties
View Full Article top
Skordos A.A.
A simplified discrete finite element model
for non-crimp fabric composites
View Full Article top
Skrifvars M.
Synthesis of reactive soybean oils for the
use as biobased thermoset resins for structural natural
fibre composites
View Full Article top
Sluys L. J.
A computational model for failure in composite laminates
including delamination, interfiber failure at fibre failure
View Full Article top
Smith P.
Intralaminar fatigue crack initiation and
growth in off-axis plies of composite laminates
View Full Article top
Smith P.A.
Design allowables: considering the tensile
and compressive behaviour of notched and unnotched CFRP
View Full Article top
Soares R.
A model for predicting multiscale crack
growth due to impact in heterogeneous viscoelastic solids
View Full Article top
Soccard E.
Ultrasonic welding of thermoplastic
composites, modeling of the process
View Full Article top
Sohail Khan M.
Development and characterization of ptfe
nanopowder-elastomeric composites for tribological
allpications
View Full Article top
Sohier L.
Definition of a simple test to characterize
the non-linear shear behaviour of the adhesive in an
assembly
View Full Article top
Soleiman Fallah A.
Numerical study of the effect of a
core-adjacent layer of polyurea on the blast energy
absorption of a sandwich T-joint
View Full Article top
Sorensen L.
Characterisation of bridging tractions in mode-I
delamination using distributed strain measurements and
numerical modeling
View Full Article top
Soutis C.
Analysis of hygrothermal effects on the
compressive strength of CFRP laminates
View Full Article
Predicting the residual stiffness properties
of carbon fibre/epoxy laminates loaded in thermal fatigue
View Full Article
Optimisation of interfacial properties for
tensile strength by plasma polmerisation
View Full Article top
Souza F.
A model for predicting multiscale crack
growth due to impact in heterogeneous viscoelastic solids
View Full Article top
Spanos C.G.
Preparation and characterization of
exfoliated ldpe/organolaponite nanocomposites
View Full Article top
Spearing M.
Very high resolution computed tomography of
damage in laminated composites
View Full Article top
Spendley P.
Design allowables: considering the tensile
and compressive behaviour of notched and unnotched CFRP
View Full Article top
Srebrenkoska V.
Recycling and reuse facilities of lignocellulosic material
filled eco-composites
View Full Article top
Stadlbauer W.
Application of micromechanical models for
estimating wood plastic composites properties
View Full Article
High impact modification of PLA with natural
rubber and the influence of fiber content, fiber length on
the impact strength of pla-flax-natural rubber composites
View Full Article top
Staiger M.P.
Durability of wood
flour-recycled thermoplastics composites under accelerated
freeze-thaw cycles
View Full Article top
Starikov R.
Fatigue resistance of composite fibre-metal
laminates subjected to impact loading
View Full Article top
Starkova O.
Effect of temperature, moisture and strain
rate on limits of linear viscoelastic behaviour of polyamide
66 filled with
TiO2 nanoparticles
View Full Article top
Steidl J.
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Stenzenberger H.D.
Bismaleimide composites: unusual processing
techniques
View Full Article top
Stronge W.J.
Ballistic limit for oblique impact of thin
sandwich panels and multi-layered plates
View Full Article top
Strömberg K.O.
Automation from an automotive perspective
View Full Article top
Ståhlberg D.
Effects of dual cure and surface treatments
on coating adhesion to different smc-substrates
View Full Article top
Sudarchikov V.A.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Sugano N.
On a design method of
composite stem based on ct images
View Full Article top
Sugimoto N.
Impact behavior and optimum design of CFRP/Al
hybridbeam in side collision of automobiles
View Full Article top
Sundelin J.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
Sundermann R.
Automated production of complex
CFRP-components
View Full Article top
Sureeyatanapas P.
Nanotube composite coatings as strain
sensors on glass fibres in epoxy composites
View Full Article top
Swait T.J.
Optimisation of interfacial properties for
tensile strength by plasma polmerisation
View Full Article top
Svanberg J.M.
Investigation of the relaxed shape of partly
cured thermoset composite materials
View Full Article top
Svanberg M.
Numerical simulations of metal onto
composites casting
View Full Article
A simplified method for predictions of shape
distortions
View Full Article top
Sztefek P.
Compressive properties of impact damage in
composite laminates determined by an inverse method
View Full Article top
T
Takeda R.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article top
Takeda S.
Dimensional and geometrical stability of
CFRP laminates in hostile environment
View Full Article top
Tamura S.
Design method of API high pressure FRP pipe
View Full Article
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article
Cross-point binders for glass fiber mat
utilizing electronic ion effect
View Full Article
Manufacturing know-how using self-condensing
binder for glass fiber mat
View Full Article top
Tamuzs V.
Development of test methods for adhesion
measurements of flexible elastic materials
View Full Article
Compressive behavior of CFRP-confined square
concrete columns
View Full Article top
Tanaka H.
Evaluation of anisotropic deformation and
fracture properties in extruded HAp/PLLA composites
View Full Article top
Tanaka K.
Environmental degradation of
stereocomplex-type polylactic acid fiber
View Full Article top
Tanaka M.
Evaluation of anisotropic deformation and
fracture properties in extruded HAp/PLLA composites
View Full Article top
Tanaka R.
Damage development analysis based on strain
energy release rate for 3-d woven composite
View Full Article top
Tang S.
Design, manufacture, and analysis of 3D
honeycomb textile composites
View Full Article top
Tarasovs S.
Development of test methods for adhesion
measurements of flexible elastic materials
View Full Article top
Tarján G.
Buckling of composite plates subjected to
shear and linerly varrying loads
View Full Article top
Tassieri M.
A study of the rheology, processing and flow
induced mesostructures of glass bead filled polystyrene
View Full Article top
Tcherdyntsev V.V.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Tepfers R.
Compressive behavior of CFRP-confined square
concrete columns
View Full Article top
Thévenet P.
Initiation and propagation mechanisms of
progressive crushing in carbon-epoxy laminated plates
View Full Article top
Thiébaud F.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Thollon Y.
A generalized damage model for woven ply
laminates under static and fatigue loads
View Full Article top
Thomas M.
Thermal properties of orthotropic materials:
experimental study and correlation with microstructure
View Full Article top
Thomason J.
Mechanical testing of natural fibre
reinforced polyester resin composites and mode 1 fracture
toughness testing of resin blocks
View Full Article
Anisotropy of reinforcement fibres and its
influence on the apparent interfacial shear strength in
thermoplastic composites
View Full Article top
Thomason J.L.
Vacuum infusion of natural fibre composites
for structural applications
View Full Article
The investigation of fibre reinforcement
effects in thermoplastic materials: interfacial bond
strength and fibre end parameter
View Full Article top
Thomsen O.T.
Free vibrations of sandwich panels with a transversely
flexible core and temperature dependent core properties
View Full Article
Novel image analysis procedure for measuring
fibre misalignment in unidirectional fibre composites
View Full Article top
Thorne A.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Thorne A.M.
Fatigue failure of a composite sandwich beam
containing a central notch
View Full Article top
Thygesen A.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article top
Tierney J.
Design and fabrication of vartm fabricated
skin panels with integrated hollow hat stiffeners
View Full Article top
Tjin S.C.
Nde detection of manufacturing defects in
composite bonded joints using CFGB sensors
View Full Article top
Todoroki A.
Fracture behavior of CFRP laminate under
artificial lightning strike
View Full Article top
Toftegaard H.
Throug-thickness shear testing of Divinycell
H130 foam
View Full Article top
Toll S.
Two-phase continuum modelling of composites
consolidation
View Full Article
Modelling of open-cell cellular solids at
finite deformations
View Full Article top
Tolstun A.N.
Oxide fibres for heat resistant composites
View Full Article top
Tomlinson S.K.
Novel dental cements containing combinations
of cyanoacrylate resin, hydroxyapatite, and new
aluminium-based fillers
View Full Article top
Torregaray A.
Microstructural analysis of the reinforced
Al-Cu5MgTi/TuB2 6 wt. % alloy for investment casting
applications
View Full Article top
Totry E.
Failure criteria for composite materials
under multiaxial stress states
View Full Article top
Trask R.S.
Self-healing composite sandwich panels
View Full Article
Bioinspired and biomimetic self-healing of
advanced composite materials
View Full Article top
Trey S.M.
Effects of dual cure and surface treatments
on coating adhesion to different smc-substrates
View Full Article top
Triantafyllidis K.S.
Preparation and characterization of
exfoliated ldpe/organolaponite nanocomposites
View Full Article top
Trovalet M.
An enhanced computational micromodel for
CFRP laminates
View Full Article top
Tsiourva T.E.
Experimental investigation of composite
patch reinforced corroded steel plates in static loading
View Full Article top
Tsotra
Benzoxazine Chemistry: A New Material to
meet Fire Retardant Challenges of Aerospace Interiors
applications
View Full Article top
Tsouvalis N.G.
Experimental investigation of composite
patch reinforced corroded steel plates in static loading
View Full Article top
Turner T.A.
The permeability of random discontinuous
carbon fibre preforms
View Full Article top
Turvey G.J.
Bending of tip-loaded CFRP stiffened
pultruded GRP cantilevers: comparison between theory and
experiment
View Full Article top
U
Ueno I.
Interfacial strength evaluation in a glass
fiber reinforced composite using cruciform specimen method
View Full Article top
Unwin A.P.
Developing the next generation of
self-reinforced polymer composites
View Full Article top
Ureña A.
Carbon nanofibers reinforced adhesives for
joining carbon fiber epoxy composites
View Full Article top
Usherenko S.
Massive composite material on the basis of
iron
View Full Article top
V
Valery S.
Massive composite material on the basis of
iron
View Full Article top
Vallons K.
Impact and post-impact properties of carbon
fibre non-crimp fabric composites
View Full Article top
Valtierra S.A.
Structural health-monitoring of GFRP
structures using embedded fibre Bragg gratings
View Full Article top
Vanclooster K.
Simulating and validating the draping of
woven fibre reinforced polymers
View Full Article top
Vantomme J.
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article top
Varna J.
Debond crack growth in fatigue along fiber
in UD composite with broken fibers
View Full Article
Secondary damage modes in laminates
initiated by intralaminar cracks
View Full Article
Study of the displacement field on the edge
of cracked laminated composites
View Full Article
Micromechanical modeling of wood fiber
composites
View Full Article
Hierarchical design as a tool in development
of wood-based composite applications
View Full Article top
Vassal J.P.
Conduction in composites with highly
conductive short fibres: comparison between experiments,
discrete element simulation and analytical solution
View Full Article top
Vassallo E.
Improvement of moisture barrier properties
of CFRP for high-precision engineering applications through
silicon-like hybrid films prepared by plasma enhanced
chemical vapour deposition
View Full Article top
Vautrin A.
Introduction to the characterization of
hygrothermal microcracking of composites reinforced by
stitched non-woven UD laminas
View Full Article
Prediction and characterization of the resin
flow and the fibrous preform behaviour during liquid resin
infusion (LRI)
View Full Article top
Vavouliotis A.
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article
Nano-enhanced impact properties of carbon
fibre reinforced composites
View Full Article top
Vazquez J.T.
Experimental analysis and
modeling of z-pinned joints under pull-out loading
View Full Article top
Velthuis R.
Process parameters for induction welding of
metal/composite joints
View Full Article top
Verhelst R.
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article top
Verpoest I.
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article
Simulating and validating the draping of
woven fibre reinforced polymers
View Full Article
Predictive analyses and experimental
validations of effective elastic properties of 2D and 3D
woven composites
View Full Article
Impact and post-impact properties of carbon
fibre non-crimp fabric composites
View Full Article
Meso scale analysis of damage and stiffness
degradation in ncf composites
View Full Article top
Vilks U.
Development of test methods for adhesion
measurements of flexible elastic materials
View Full Article top
Vlekken J.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Voet E.
High strain measurements during fatigue
cycling in fibre reinforced thermoplastic composites using
imbedded draw tower fibre Bragg grating sensors
View Full Article top
Volk J.
Characterization of grain byproducts and
properties of its biodegrade composites
View Full Article top
Voyatzi T.
Multi-stage fatigue life monitoring on
carbon fibre reinforced polymers enhanced with multi-wall
carbon nanotubes
View Full Article top
Vrellos N.
Intralaminar fatigue crack initiation and
growth in off-axis plies of composite laminates
View Full Article top
Vuorinen J.
Characterization of melt compounded
polyamide titanium dioxide nanocomposites: comparison
between novel atomic layer deposition coated
View Full Article top
W
Wakil el S.D.
Effect of process parameters on the grinding
of polymeric composites
View Full Article top
Walker A.
Strain measurement of carbon composites
using advanced sensor technology
View Full Article top
Walrick J.C.
Mechanical effect and
shielding effectiveness of the insertion of metallic screen
in glass and carbon composite
View Full Article top
Wang C.C.
The investigation of fibre reinforcement
effects in thermoplastic materials: interfacial bond
strength and fibre end parameter
View Full Article top
Wanner A.
Damage evolution and anisotropy in freeze
cast metal/ceramic composites: an in-situ SEM analysis
View Full Article top
Ward I.M.
Developing the next generation of
self-reinforced polymer composites
View Full Article
The incorporation of carbon nano fibres to
enhance the properties of hot compacted self-reinforces
single polymer composites
View Full Article
Understanding the links between structure
and properties in die drawing wood powder polymer composites
View Full Article top
Warrior N.A.
Numerical modelling of the behavior of
thermoplastic coomposite sandwich structures under localised
impact loading
View Full Article
The permeability of random discontinuous
carbon fibre preforms
View Full Article top
Wastiels J.
Determination of material parameters of a
textile reinforced composite using an inverse method
View Full Article
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article
Impact resistance of load bearing sandwich
elements with textile reinforced concrete faces
View Full Article top
Watanabe N.
Damage development analysis based on strain
energy release rate for 3-d woven composite
View Full Article top
Weager B.
Aligned flax fibre/polylactate composites -
a materials model system to show the potential of
biocomposites in engineering applications
View Full Article top
Weager B.M.
Development of high performance furan-based
bio-composites for vehicle panels
View Full Article top
Weber M.
Analyzis of the fatigue life of hydrogen
high pressure tanks
View Full Article top
Weidmann
Benzoxazine Chemistry: A New Material to
meet Fire Retardant Challenges of Aerospace Interiors
applications
View Full Article top
Wheat H.G.
Performance monitoring of reinforced
concrete wrapped with FRPS
View Full Article top
Whitcomb J.
Data bank for validation of finite element
analysis of textiles and textile composites: a proposal
View Full Article top
Whitney D.P.
Performance monitoring of reinforced
concrete wrapped with FRPS
View Full Article top
Wichmann M.H.G.
Damage sensing with nanocomposite/glass-fibre
hybrid composites via electrical conductivity methods
View Full Article
Functional properties of nanocomposite epoxy
matrix systems for strain-sensing applications
View Full Article top
Wickholm K.
Hierarchical design as a tool in development
of wood-based composite applications
View Full Article top
Widulle C.
Manufacturing method for symmetric laminates
from improved stitch bonded multi-plies
View Full Article top
Wilkes T.E.
Mechanical behavior of interpenetrating al-sic composites
derived from wood templates
View Full Article top
Williams G.J.
Bioinspired and biomimetic self-healing of
advanced composite materials
View Full Article top
Williams H.R.
Self-healing composite sandwich panels
View Full Article top
Wisnom M. R.
Scaling effects in notched composites
View Full Article top
Withers P.J.
Strain measurement of carbon composites
using advanced sensor technology
View Full Article top
Wolf de K.
Simulation of the damage
tolerance behaviour of CFRP/honeycomb sandwich based on
measured properties of the resin impregnated core paper
View Full Article
Experimental and
numerical study on axial crushing behaviour of pultruded
composite tubes
View Full Article
Experimental and numerical study of the
energy absorption capacity of pultruded composite tubes
View Full Article top
Wolfahrt M.
Testing and analysis of a highly loaded
composite flange
View Full Article top
Wool R. P.
Bio-composites from canola oil based resin
and hemp and flax fibers
View Full Article top
Wright P.
Very high resolution computed tomography of
damage in laminated composites
View Full Article top
Wu Z.
Cross-point binders for glass fiber mat
utilizing electronic ion effect
View Full Article top
Wysocki M.
Numerical simulations of metal onto
composites casting
View Full Article
Two-phase continuum modelling of composites
consolidation
View Full Article top
X
Xidas P.
Preparation and characterization of
exfoliated ldpe/organolaponite nanocomposites
View Full Article top
Y
Yazdchi K.
Influence of van der Waals interaction on
the mechanical properties of single-walled carbon nanotubes
with introducing effective wall thickness
View Full Article top
Yin L.
Microstructurally inhomogeneous composites
with tailored reinforcement distribution
View Full Article top
Yoneda K.
E-commerce with serving manufacturing
know-how for glass fiber
View Full Article top
Yoshikawa
On a design method of
composite stem based on ct images
View Full Article top
Young R.J.
Analysis of the microstructure and
deformation of woven composites using microfocus X-ray
diffraction
View Full Article
Polymer composite nanofibres
View Full Article
Nanotube composite coatings as strain
sensors on glass fibres in epoxy composites
View Full Article
Deformation micromechanics of glass fibre
based and hybrid cellulose-glass fibre composites
View Full Article top
Yu W.R.
Manufacture of CNT reinforced polymer
composites using nanofibers containing CNT
View Full Article top
Yurieva N.V.
Properties of a mechanoactivated composite
based on super-high-molecular polyethylene filled with
bronze powder
View Full Article top
Z
Zahlen P.
On the multi-scale modelling of the
manufacturing of a thick walled composite panel- theoretical
and experimental study
View Full Article top
Zako M.
Predictive analyses and experimental
validations of effective elastic properties of 2D and 3D
woven composites
View Full Article
On a design method of
composite stem based on ct images
View Full Article
A proposal of stress/strain analytical
procedure of textile compositess with stitch by m3 method
View Full Article
Structurally stitched preforms: experimental
characterization, geometrical modelling, and FE analysis
View Full Article
A numerical simulation of damage development
for laminated woven fabric composites
View Full Article
Multiscale analysis of material damping
properties for textile composites
View Full Article top
Zenkert D.
Manufacturing process adaptation for the
cost/weight optimization of aircraft structures
View Full Article
Analysis and manufacturing of ultra thick
laminates for future aircraft applications
View Full Article
Reasonable knockdown factors for sandwich
face sheet wrinkling
View Full Article top
Zhang B.
Chemical monitoring of composite matrices by
evanescent wave spectroscopy
View Full Article top
Zhang H.
Effect of temperature, moisture and strain rate on limits of
linear viscoelastic behaviour of polyamide 66 filled with
TiO2 nanoparticles
View Full Article top
Zhang Z.
Effect of temperature, moisture and strain rate on limits of
linear viscoelastic behaviour of polyamide 66 filled with
TiO2 nanoparticles
View Full Article top
Zhao H.
Experimental study of sandwich panel under
impact loading
View Full Article
Carbon nanotubes-reinforcing mgo-doped Al2O3
nanocomposites
View Full Article top
Zhou B.
Analytical methods for the stress
concentration analysis of multilayered anisotropic
composites with pin-loaded holes
View Full Article top
Zhou D.W.
Ballistic limit for oblique impact of thin
sandwich panels and multi-layered plates
View Full Article top
Zhou Q.
Graftning of poly(ε-caprolactone) from
microfibrillated cellulose films - for biocompostes
applications
View Full Article top
Zhu Y.
Cross-point binders for glass fiber mat
utilizing electronic ion effect
View Full Article
Manufacturing know-how using self-condensing
binder for glass fiber mat
View Full Article top
Zhua Y.
Carbon nanotubes-reinforcing mgo-doped Al2O3
nanocomposites
View Full Article top
Ziegler S.
Thermo - hydromechanical compression of fast
growing poplar from short term plantation
View Full Article top
Zīle E.
Compressive behavior of CFRP-confined square
concrete columns
View Full Article top
Zinno A.
Numerical estimates of composite sandwich
response to quasi static impact
View Full Article top
Zitoune R.
Influence of manufacturing on the critical
machining parameters during drilling
View Full Article
Through-the-thickness material properties
identification using 3D-DIC and FBG measurements
View Full Article
Abrasive-water-jet machining of polymer
composite materials
View Full Article top
Zscheyge M.
Numerical and experimental deformation and
failure analysis of 3D-textile reinforced lightweight
structures under impact loads
View Full Article top
|
